🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.next.hardware
4 messages
4 total messages Started by J.Cassidy - Optometry Tue, 15 Dec 1992 14:31
Re: Next to Mac networking
#1382
Author: J.Cassidy - Optometry
Date: Tue, 15 Dec 1992 14:31
58 lines
3286 bytes
In article <1992Dec14.222737.8820@pencom.com> you write:
>Hi All,
>I am trying to connect my wife's mac to my NeXT so she can print on my  
>printer.
>Anyone out there do this? What hardware do I need?
>I will post a summary if there is enough intrest.
>
>Bill Dudney
>dudney@pencom.com

Greetings.
 
I have a NeXT station and a MAC Quadra and a PC at home.  They
are connected with thin coax Ethernet.  I purchased a product
from IPT, named Ushare that allows the Quadra to print onto the
NeXT's laser.  The product works well with 3.0, was easy to set
up, and is transparent to the MAC (it just shows up in the chooser
as 'NeXTLaser').

I found two points on the negative side.  The software is a bit
pricy, about 600.00.  The second point is my personal experiences
with the company.  The software required an encripted key which
is based on the CPU ID of your next.  You must call in after you 
receive the software to get this key.  Here is were my problems
occurred.  My NeXT is at home.  They seemed unwilling to just give
me the key over the phone, wanting a FAX instead.  After some
discussion, I convinced them that I was not going back into work
just to fax the information that I could tell them over the phone.
They said that they would call right back.  Three days later,
I had to make two more calls to finally get the key.  
 
The key that you get is only good for 1-2months.  Only after IPT
receives the payment will you get a perm. key.  Again, when the
time came up to get the key, I had to make 3-4 phone calls over
2 days to get a response.

The last point, the origonal software was only good for NS 2.1.
Since I purchased the software within 2 weeks of their updated
product for 3.0, I was told that my upgrade would be 'in the mail'.
Stupidly, I upgraded to 3.0.  When I called IPT 3 days later, I
was told that I could not have the upgrade.  After finally getting
through to the person who had origionally told me that my upgrade
was in the mail, he told me that the version I had would work 
just fine.  When it didn't, and I raised HELL with them, they 
said that they had 'misunderstood' and would send me my update.
I week later I finally had it.

My point is this, their product works great, their tech support
is good, but in my experience they are disorganized.  The software
key idea is ok, but they inconvienienced me and wasted my time
by being slow producing the software keys.           
.

=========================================================================
Jim Cassidy                           jcassidy@focus.uwaterloo.ca
University of Waterloo                optadm7@watserv1.uwaterloo.ca
200 University Ave.                   VE3RTS
Waterloo, Ontario, Canada N2L 3G1     (519) 885-1211 ext. 6240
Re: Next to Mac networking
#1384
Author: Daniel Cwiertniewicz
Date: Tue, 15 Dec 1992 16:02
7 lines
749 bytes
With NS3 doesn't the NeXT printer show up as an AT type device?

---
Daniel Cwiertniewicz				Phone:	(313)-577-0787
Systems Analyst, Networking Support Group	Fax:	(313)-577-8787
Computing and Information Technology		E-Mail:	DCWIERT@WAYNEST1 or
Wayne State University				dan@foghorn.pass.wayne.edu
Re: Next to Mac networking
#1396
Author: Kenneth K.F. Lui
Date: Wed, 16 Dec 1992 03:24
60 lines
3080 bytes
In article <BzB1o6.CFH@watserv1.uwaterloo.ca> "J.Cassidy - Optometry" <optadm7@watserv1.uwaterloo.ca> writes:
>I have a NeXT station and a MAC Quadra and a PC at home.  They
>are connected with thin coax Ethernet.  I purchased a product
>from IPT, named Ushare

I have an '040 cube at home with a Mac IIx.  Otherwise, same
configuration.

>                                      You must call in after you 
>receive the software to get this key.

I thought this was stupid as well--but then you have to do the
same thing with Mathematica.  Re: Mathematica, I don't use it so
it just sits unregistered.

>                                They seemed unwilling to just give
>me the key over the phone, wanting a FAX instead.

Strange, they called me back and gave me the key within 6 hours
or so.  No questions asked.

>The key that you get is only good for 1-2months.  Only after IPT
>receives the payment will you get a perm. key.

Are you sure?  Nothing was said about the key I received to be
temporary.  How did you pay for the product?  I used plastic.

>The last point, the origonal software was only good for NS 2.1.
>Since I purchased the software within 2 weeks of their updated
>product for 3.0, I was told that my upgrade would be 'in the mail'.

I bought the product around a week ago.  The box came with v1.07
for NS2.1 and v1.09 for NS3.0.  When did you purchase the
product?  I'm running NS2.1 and plan on upgrading to V3 when 3.1
comes out.

The product works well.  I'm able to print directly from my Mac
to my NeXT laser printer and I've offloaded a lot of files stored
on Macintosh diskettes to 1 optical disk.  Using the optical is
waaay slow, though.  What's a nice feature is that I'm allowed to
print from my NeXT to printers connected to my Mac--when 1200dpi
laser printers are a commodity, I'll be using that feature a
lot...unless NeXT comes out with one first to replace the 400dpi
laser.  Too bad I can't see Macintosh volumes from my NeXT or
it'll be perfect, but I don't have that need at this point.

One additional item: the scripts that start ushare has a lot of
sleeps and it would take forever for the daemons to be launched.
I commented them out and now it loads a lot faster and everything
still works...



Ken
#include <disclaimer>  My opinions do not reflect those of my employer
                       I'm not affiliated with IPT
-- 
Kenneth K.F. Lui, klui@corp.hp.com                  3000 Hanover Street MS20BJ
Corporate Administrative Information Systems        Palo Alto, CA  94304   USA
Core Application Technologies                1(415)857-3230 Fax 1(415)852-8026
Re: Next to Mac networking
#1419
Author: Maurice Shihadi
Date: Fri, 18 Dec 1992 04:27
9 lines
805 bytes
In responce to Jim's post:

Gee, you mean IPT actually got back to you?  I called them 
three times to confirm if a recent post on the net stating that 
Ushare would be licensed by NeXT was true or false.  Still, no reply.
So, does anyone know if there is any truth to Ushare being
used in NeXTstep.  If so, what version?

maurices
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads