Help! Attached CD-ROM and NeXT won't boot

Thread View: comp.sys.next.hardware

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Maureen Cyr Wed, 28 Oct 1992 07:26

#32

Author: Maureen Cyr
Date: Wed, 28 Oct 1992 07:26

20 lines
1023 bytes

Help! Help! I plugged in my CD-ROM (AppleCD 150, same Sony drive as in NeXT
CD-ROM) while my NeXT Cube '030 was on, then hit Command-tilde and restarted
the machine, hoping that my CD-ROM would be loaded.  What happened instead was
my SCSI no longer boots and nothing works.  Upon power up, the monitor window
appears with the following error:

  Exception #3 (0xc) 0x1f2

When I hit Command-Command-tilde and reboot the machine, the following is
printed out:

  Booting from SCSI target 0 lun 0
  commands section > 2048
  load failed

  blk0 boot:

Does anyone know what has happened?  Any help is much appreciated!

- Andy

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads