Thread View: comp.sys.next.hardware
3 messages
3 total messages
Started by Ian H. Stewart
Wed, 28 Oct 1992 22:28
SCIS-2 & FastSCSI
Author: Ian H. Stewart
Date: Wed, 28 Oct 1992 22:28
Date: Wed, 28 Oct 1992 22:28
16 lines
908 bytes
908 bytes
What is the difference between these two. My understanding is that FastSCSI has a trans rate of 10MB/sec. At one time I was told they were the same, but the my NeXT uses SCSI-2 and it only transfers at something like 5MB/sec Any help is appreciated. -- Ian H. Stewart | voice/fax 415-664-1170 Pyrian Software Group | CIS 71101,1260 Always looking for new SW to market | Net istewart@pyrian.com NeXT,Mac,PC & Sun | Isn't LiFE more like RiSK?
Re: SCIS-2 & FastSCSI
Author: Barry Lustig
Date: Thu, 29 Oct 1992 02:42
Date: Thu, 29 Oct 1992 02:42
22 lines
967 bytes
967 bytes
In article <1992Oct28.222856.168@pyrian.com> ian@pyrian.com (Ian H. Stewart) writes: What is the difference between these two. My understanding is that FastSCSI has a trans rate of 10MB/sec. At one time I was told they were the same, but the my NeXT uses SCSI-2 and it only transfers at something like 5MB/sec Any help is appreciated. SCSI-2 runs at 5MB/sec. SCSI-2 FAST runs at 10MB/sec. SCSI-2 FAST & wide runs at 20MB/sec. SCSI-2 FAST & double wide runs at 40MB/sec. The NeXT has a SCSI-2 *connector* on the back. It is running its bus at 5. barry --
Re: SCIS-2 & FastSCSI
Author: Ron Pomeroy x(Coop)
Date: Thu, 29 Oct 1992 16:02
Date: Thu, 29 Oct 1992 16:02
27 lines
1475 bytes
1475 bytes
In article <1992Oct28.222856.168@pyrian.com> ian@pyrian.com (Ian H. Stewart) writes: >>What is the difference between these two. >> >>My understanding is that FastSCSI has a trans rate of >>10MB/sec. >> >>At one time I was told they were the same, but the >>my NeXT uses SCSI-2 and it only transfers at something >>like 5MB/sec >> >>Any help is appreciated. >> >>-- >>Ian H. Stewart | voice/fax 415-664-1170 >>Pyrian Software Group | CIS 71101,1260 >>Always looking for new SW to market | Net istewart@pyrian.com >>NeXT,Mac,PC & Sun | Isn't LiFE more like RiSK? It was my understanding that the NeXT uses a SCSI-2 CONNECTOR but was really SCSI-1 internally. -- Ronald Pomeroy [Objective-Cruntime: [Smalltalk runtime]]; Advanced Micro Devices [self dream-on]; CAM Applications Group rpomeroy@aunext1.amd.com (NeXTmail preferred)
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads