Connecting a Scan-X Color scanner

Thread View: comp.sys.next.hardware

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Stuart Pearlman Fri, 09 Oct 1992 16:42

#807

Author: Stuart Pearlman
Date: Fri, 09 Oct 1992 16:42

22 lines
1244 bytes

Is it possible to daisy-chain another scsi device off of a Scan-X
Color scanner?  The scanner only has one scsi connector on the back,
so it appears that it must be the last device on the scsi chain.  

The manual states that it can go anywhere in the scsi chain, and
discusses under what circumstances the scanner needs a terminator
(basically, if it is the last device in the scsi chain).

If you can put the scanner in the middle of the scsi chain, how would
you daisy-chain the subsequent device?

If you put it at the end of the scsi chain, what's the correct way to
connect the terminator?

Thanks in advance.

-stuart
-- 
Stuart Pearlman                                 stuart@oasys.dt.navy.mil
Trandes Corporation                             +1 301 459 0200
On-Contract-To: David Taylor Research Center    +1 301 227 1428

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads