need help installing a Fujitsu 2624FA

Thread View: comp.sys.next.hardware

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by William C. Saphir Wed, 14 Oct 1992 23:43

#876

Author: William C. Saphir
Date: Wed, 14 Oct 1992 23:43

20 lines
1025 bytes

I'm trying to install a Fujitsu 2624FA drive on my 
Nextstation. During the boot process, I get:

	FUJITSU NOT READY as sd1 at sc0 target 2 lun 0
	Waiting for drive to come ready

It waits for about 10 seconds and then continues. 
The drive cannot be accessed after the machine boots. 

At the moment, I'm using the factory jumper settings,
except that the synchronous data transfer request is
disabled (and the scsi id is set to 2).  I've also
experimented with scsi1/scsi2, parity, and unit
attention. Same response for all.

Can someone tell me what I'm doing wrong? 
Thanks. 

	Bill Saphir
	wcs@hermes.chpc.utexas.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads