Emacs3.0 on a standalone

Article View: comp.sys.next.misc

Article #4481

Back to comp.sys.next.misc Previous Next

#4481

From: citdem
Date: Fri, 18 Dec 1992 01:35

18 lines
1354 bytes

Hi.  For those in a similar bind, I thought I'd post how I got Emacs3.0
running on my standalone NeXT.  (Remember, I have a standalone with
boot loaded SLIP daemon; but the SLIP line is brought up/down manually.)
The problem was that, to make use of SLIP, I set my hostname to "mccube".
I thought that meant putting "mccube" in /etc/hostconfig and /etc/hosts
with my domain (tucson.az.us) in /etc/resolv.conf. (The INETADDR entry
in hostconfig would be NeXT's default value.)  As SLIP has it's own
config file, these changes in /etc seemed enough.  Not so.  What I needed
to do (at least for Emacs - and maybe others?) was to define "mccube"
using HostManager (domain is "/", IP address = NeXT's default value).
Pretty easy.  Now Emacs3.0 works fine.

Thanks to all who sent advice.  "netters" are a great resource.

Don McCollam
citdem@happy.rc.arizona.edu

(Thanks again, guys!)

Technical Details

Message-ID: <00965437.CBEF2DF4@VIOLET.CCIT.ARIZONA.EDU>

Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!news.cs.indiana.edu!arizona.edu!VIOLET.CCIT.ARIZONA.EDU!CITDEM

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!spool.mu.edu!news.cs.indiana.edu!arizona.edu!VIOLET.CCIT.ARIZONA.EDU!CITDEM
Newsgroups: comp.sys.next.misc
Subject: Emacs3.0 on a standalone
Message-ID: <00965437.CBEF2DF4@VIOLET.CCIT.ARIZONA.EDU>
From: citdem@VIOLET.CCIT.ARIZONA.EDU
Date: Fri, 18 Dec 1992 01:35:12 GMT
Reply-To: citdem@VIOLET.CCIT.ARIZONA.EDU
Distribution: na,local
Organization: University of Arizona
Nntp-Posting-Host: violet.ccit.arizona.edu
Lines: 18