🚀 go-pugleaf

In article <1992Oct5.194055.15465@mnemosyne.cs.du.edu> lmccullo@nyx.cs.du.edu  
(Michael McCulloch) writes:
>  <stuff deleted here>
>
> I disabled expectation of a password in the login-unix.tcl script and
> everything seems to work OK, except when I establish a connection from the
> client I never receive a response for telnet, ping, etc. I can see the 
> modem sending the packets over the phone line, but the server never responds.
> I'm also running into the following problems on the server side.
> 
>  < stuff deleted here also>
>
> I've checked (and double-checked) my host configuration and NetInfo is only 
> serving local. I do, however, have a default ethernet gateway set. My routing
> table after booting looks like:
> 
> Routing tables
> Destination      Gateway            Flags     Refs     Use  Interface
> localhost        localhost          UH          1      536  lo0
> gandalf          localhost          UH          0        0  slip0
> default          140.165.32.254     UG          2       17  en0
> 140.165          gandalf            U          37     1207  en0
> 
> Again, my entry in config.slip for the server is:
> 
> SLIP0LOCAL=140.165.32.59
> SLIP0REMOTE=140.165.32.59
> SLIP0NETMASK=255.255.255.0
> SLIP0CONFIG=SLIP
> SLIP0DEFAULT=NO
> 
> where 140.165.32.59 is the address of gandalf, the aspiring SLIP server.
> 
> When I disable SLIP and reboot, the AppleShare stuff mounts in /Net and the
> loginwindow appears??
> 
>> Micheal,  Did you get yours to work and if so how? 
>> Im having the same problem with a similiar configuration.  They only
>> difference is that I have the SLIP0REMOTE in the config.slip files set to
>> the other machine's slip0 ip address so they both point to each other. 
>> 
>> Thanks
>> Tim Hunter
>> Allegheny College
>> thunter@alleg.edu
>>