Setting up SLIP under ver 2.1

Article View: comp.sys.next.sysadmin

Article #1466

Back to comp.sys.next.sysadmin Previous Next

#1466

From: Eric Schwartz
Date: Tue, 13 Oct 1992 14:02

18 lines
996 bytes

Has anyone successfully used the TranSys DialUP-IP software on a NeXTstation?
I've installed it semi-succesfully:  when I 'telnet' or 'ftp' (make packet
requests), the modem on /dev/cua or /dev/cufa dials out and logs into a
SLIP server.

BUT as soon as the SLIP link is up, I get the following message over and over
in the console window:

Oct 13 05:50:15 whyanext mach: zs0: recv buffer overrun

Is this a flow control problem?  Has anyone experienced this error before
either while running SLIP or something else?

HELP!!

Thanks,

Eric

Technical Details

Message-ID: <ESCHWART.92Oct13060244@netcom.Netcom.COM>

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!wupost!csus.edu!netcom.com!netcom!eschwart

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.sysadmin
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!wupost!csus.edu!netcom.com!netcom!eschwart
From: eschwart@netcom.Netcom.COM (Eric Schwartz)
Subject: Setting up SLIP under ver 2.1
Message-ID: <ESCHWART.92Oct13060244@netcom.Netcom.COM>
Sender: eschwart@netcom.com (Eric Schwartz)
Organization: Netcom Online Communications Service
Distribution: comp
Date: Tue, 13 Oct 1992 14:02:44 GMT
Lines: 18