How to make internal MAXTOR SCSI ID 2 or up...?

Thread View: comp.sys.next.sysadmin

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Gerben Wierda Mon, 12 Oct 1992 15:57

#1445

Author: Gerben Wierda
Date: Mon, 12 Oct 1992 15:57

20 lines
1386 bytes

Since CDPlayer.app doesn't work when you have SCSI ID 1 (The internal Maxtor)
and SCSI ID 0 (The external boot disk) both occupied, I'd like to make my
internal disk SCSI ID 2. When I opened the Cube I saw that there were 3
jumpers next to the SCSI connector. One of them has only 1 pin. I have been
told that this (pin 5-6) has to be connected to make a "1". that would make
the others "2" and "3".

Question. Is this "1" hardwired and are therefore only uneven SCSI numbers
available? Can I just put (a) jumper(s) on 3-4 and/or 1-2 thus making "3" or
"5"?

Thanks,

(Or: NeXT: do you have a working CDplayer.app for me?)

-- 
wierda@ltb.bso.nl (Gerben Wierda) || I speak for myself and not for my employer.
(+31) 2154 84414/(+31) 35 833539  || Support the League for Programming Freedom!
    "If you don't know where you are going, any road will take you there."
    (From the Talmud(?), rephrased in) Lewis Carroll, "Alice in Wonderland".

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads