Telebit 3000 Init string for NeXT station Turbo?

Thread View: comp.sys.next.sysadmin

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by John R. Cary Thu, 24 Dec 1992 03:49

#1994

Author: John R. Cary
Date: Thu, 24 Dec 1992 03:49

18 lines
1260 bytes

Re:  What is correct setup for Telebit 3000 on a NeXT?

I am running NeXT3.0 on a NeXT station turbo.  I bought a Telebit 3000
and a NeXT hardware handshaking cable and hooked it all up to go, but
I have no go on dialin.

My configuration works fine on dialout.  I use kermit.
But on dialin, the login herald never shows up - only a few x's,
as if a baud rate were incorrect.

Can someone send me the initialization string to successfully use
a Telebit3000 for login to a NeXT?
-- 
--------------------------
John R. Cary                                  cary@boulder.colorado.edu
Department of Astrophysical, Planetary and Atmospheric Sciences
University of Colorado, Boulder, CO 80309-0391
ph. (303) 492-1489                                   fax (303) 492-0642

Re: Telebit 3000 Init string for NeXT station Turbo?

#2004

Author: Greg Andrews
Date: Fri, 25 Dec 1992 01:26

26 lines
1340 bytes

cary@aurora.colorado.edu (John R. Cary) writes:
>
>Re:  What is correct setup for Telebit 3000 on a NeXT?
>

The &F3 pre-stored configuration.

>
>I am running NeXT3.0 on a NeXT station turbo.  I bought a Telebit 3000
>and a NeXT hardware handshaking cable and hooked it all up to go, but
>I have no go on dialin.
>
>My configuration works fine on dialout.  I use kermit.
>But on dialin, the login herald never shows up - only a few x's,
>as if a baud rate were incorrect.
>

Set the modem to use the &F3 settings, and set your getty to 19200 bps.

  -Greg
(Telebit Engineer)
-- 
:::::::::::::::::::  Greg Andrews  gerg@netcom.com  :::::::::::::::::::
ObDrieux:  MODERN PROBLEMS: Hi Diddle Diddle, The Cat and the Fiddle,
			    The Cow Blew Up on the Launching Pad
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads