Is anyone out there using a Maxtor P0-12S (Rev LB22)?

Thread View: comp.sys.next.sysadmin

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Fernando Lopez Lezcano Thu, 27 Aug 1992 10:00

#706

Author: Fernando Lopez Lezcano
Date: Thu, 27 Aug 1992 10:00

21 lines
1479 bytes

Hi netters!

Has anyone out there installed a Maxtor P0-12S (rev LB22) drive on a NeXT?  
(the machine is a 040 cube used as a server and running 2.1J). The drive was  
properly recognized, initialized, mounted and exported by the system...  
BUT... After copying the directories to the new destination using gnutar I  
used "diff -r" and discovered some files that did not match the original.  
Only very long files like a 12Mbyte .tar.Z file and soundfiles. The drive is  
properly terminated (by the way, removing the termination did not make any  
difference!) and I did tests with only that drive in the SCSI chain and also  
adding a CD-ROM drive in the middle. I also sdform'ed the drive with no  
apparent improvement.  

Any help appreciated!
Thanks in advance.
Fernando

Fernando Lopez Lezcano
Computer Music Laboratory
Keio University at Shonan Fujisawa, Japan
nando@sfc.keio.ac.jp

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads