Have build in 64 MB, but Novell 4.1 see only 32 MB - Need Help - Thread - go-pugleaf

Thread View: comp.sys.novell

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Oliver Kretzschmar Wed, 19 Jul 1995 00:00

Have build in 64 MB, but Novell 4.1 see only 32 MB - Need Help

#6068

Author: Oliver Kretzschmar
Date: Wed, 19 Jul 1995 00:00

17 lines
1237 bytes

Hey,

we have Novell 4.1 running and have installed in our EISA computer 64 MB ram.
But in the monitor program of NOVELL (load monitor) under Resource Utilization
we see as working memory only 32 MB. We have set the option above16 to ON.
If we start the computer you can see counting bios to 64 MB. How can we use
the full 64 MB on the NOVELL 4.1 server. Please mail me your informations !

Thanks a lot,

	Oliver

-- 
 NAME : O.Kretzschmar                      Inst.IKE / University Stuttgart
 PHONE: +49 711 685 2130                           Pfaffenwaldring 31
 FAX  : +49 711 685 2010                            7000 Stuttgart 80
 EMAIL: kretzschmar@ike.uni-stuttgart.de

Re: Have build in 64 MB, but Novell 4.1 see only 32 MB - Need Help

#6067

Author: Iraj Talebian
Date: Thu, 20 Jul 1995 00:00

42 lines
1759 bytes

In <3uj59e$so8@info4.rus.uni-stuttgart.de>
fabt2291@ikesg1.energietechnik.uni-stuttgart.de (Oliver Kretzschmar)
writes: 
>
>Hey,
>
>we have Novell 4.1 running and have installed in our EISA computer 64
MB ram.
>But in the monitor program of NOVELL (load monitor) under Resource
Utilization
>we see as working memory only 32 MB. We have set the option above16 to
ON.
>If we start the computer you can see counting bios to 64 MB. How can
we use
>the full 64 MB on the NOVELL 4.1 server. Please mail me your
informations !
>
>Thanks a lot,
>
>	Oliver
>
>-- 
> NAME : O.Kretzschmar                      Inst.IKE / University
Stuttgart
> PHONE: +49 711 685 2130                           Pfaffenwaldring 31
> FAX  : +49 711 685 2010                            7000 Stuttgart 80
> EMAIL: kretzschmar@ike.uni-stuttgart.de


Oliver;

Netware 4.x would automaticallay read your correct amount of RAM in an
EISA system.  You need to go to your EISA system configuration and
change your RAM configuration from 32 megs to 64 megs.  Remeber setting
your RAM in EISA conguration and your CMOS are two different things. 
Good luck.

-- 


					Iraj T
					iraj2@ix.netcom.com

Re: Have build in 64 MB, but Novell 4.1 see only 32 MB - Need Help

#6066

Author: Gary Halleen
Date: Mon, 24 Jul 1995 00:00

26 lines
1477 bytes

Type MEMORY at the colon prompt and see if it also says you only have
32MB.  You may need to add a line to your AUTOEXEC.NCF or STARTUP.NCF
to REGISTER MEMORY...



fabt2291@ikesg1.energietechnik.uni-stuttgart.de (Oliver Kretzschmar)
wrote:

>Hey,

>we have Novell 4.1 running and have installed in our EISA computer 64 MB ram.
>But in the monitor program of NOVELL (load monitor) under Resource Utilization
>we see as working memory only 32 MB. We have set the option above16 to ON.
>If we start the computer you can see counting bios to 64 MB. How can we use
>the full 64 MB on the NOVELL 4.1 server. Please mail me your informations !

>Thanks a lot,

>	Oliver

>-- 
> NAME : O.Kretzschmar                      Inst.IKE / University Stuttgart
> PHONE: +49 711 685 2130                           Pfaffenwaldring 31
> FAX  : +49 711 685 2010                            7000 Stuttgart 80
> EMAIL: kretzschmar@ike.uni-stuttgart.de

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads