Article View: comp.sys.nsc.32k
Article #132Re: Gatewayed mail message
From: George Scolaro
Date: Fri, 04 May 1990 23:48
Date: Fri, 04 May 1990 23:48
17 lines
1095 bytes
1095 bytes
[In the message entitled "Gatewayed mail message" on May 4, 17:53, bob von borstel writes:] > so....i assume driving the 30mhz 532 at 25 mhz is okay. > I know some ic designers (motorola) for example have minimum timing requirements > when you want to drive a fast chip slower (88k). Don't have the specs on > the 532 driving. No problem. The 532 minimum clock speed is 10 MHz. Since 30Mhz, 25MHz and 20MHz speeds are all the same part - just graded for speed, you can certainly run a 30MHz part at 25MHz (or slower). best regards, -- George Scolaro (gs@vw25.chips.com) Chips & Technologies +1 408/434-0600 X4556 work 3050 Zanker Road San Jose, CA 95134
Technical Details
Message-ID:
<m0hRCNy-0000NDC@vw25.chips.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!samsung!usc!apple!vsi1!daver!bungi.com!newsShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!samsung!usc!apple!vsi1!daver!bungi.com!news From: gs@vw25.chips.com (George Scolaro) Newsgroups: comp.sys.nsc.32k,alt.sys.pc532 Subject: Re: Gatewayed mail message Message-ID: <m0hRCNy-0000NDC@vw25.chips.com> Date: 4 May 90 23:48:38 GMT Sender: news@daver.bungi.com Distribution: comp Lines: 17 Approved: news@daver.bungi.com