Article View: comp.sys.nsc.32k
Article #131Gatewayed mail message
From: bob von borstel
Date: Fri, 04 May 1990 22:53
Date: Fri, 04 May 1990 22:53
9 lines
901 bytes
901 bytes
okay on the pga/plcc 32381 explanation. The primary reason I was asking about the 30mhz/25mhz 532 part, was that I have a couple of the 532 designer kits from National, and aside from some of the other parts that aren't pertinent to this board, the 532 is a 30mhz part. so....i assume driving the 30mhz 532 at 25 mhz is okay. I know some ic designers (motorola) for example have minimum timing requirements when you want to drive a fast chip slower (88k). Don't have the specs on the 532 driving.
Technical Details
Message-ID:
<9005042253.AA28616@iitmax.iit.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!vsi1!daver!bungi.com!newsShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!vsi1!daver!bungi.com!news From: vonb@iitmax.iit.edu (bob von borstel) Newsgroups: comp.sys.nsc.32k,alt.sys.pc532 Subject: Gatewayed mail message Message-ID: <9005042253.AA28616@iitmax.iit.edu> Date: 4 May 90 22:53:13 GMT Sender: news@daver.bungi.com Distribution: comp Lines: 9 Approved: news@daver.bungi.com