Thread View: comp.sys.sgi.hardware
2 messages
2 total messages
Started by Victor Quevedo
Thu, 07 Jan 1993 01:54
SGI-Tapes and CD-ROM
Author: Victor Quevedo
Date: Thu, 07 Jan 1993 01:54
Date: Thu, 07 Jan 1993 01:54
14 lines
886 bytes
886 bytes
I am interesting in finding out if you can connect various Tape Drives and CDROMS to a SGI Indigo. 1. Will a Sun compatible Tape 1/4" (150) drive work on an SGI? 2. Will a Sun, Apple, NeXT CDROM drive work on an SGI? 3. If they do work will they be able to read the SGI specific inst format? I have access to several Sun/NeXT/Apple CDROMs and Sun Tape units. I would like to know if they would work. -Victor Quevedo vqueved@neptune.calstatela.edu
Re: SGI-Tapes and CD-ROM
Author: Dave Olson
Date: Thu, 07 Jan 1993 07:00
Date: Thu, 07 Jan 1993 07:00
28 lines
1515 bytes
1515 bytes
In <1993Jan6.175433.3702@nic.csu.net> vqueved@neptune.uucp (Victor Quevedo) writes:
| I am interesting in finding out if you can connect various Tape Drives and
| CDROMS to a SGI Indigo.
|
| 1. Will a Sun compatible Tape 1/4" (150) drive work on
| an SGI?
Almost certainly.
| 2. Will a Sun, Apple, NeXT CDROM drive work on an SGI?
The Sun drives will work on Indigos, at least for most people (not
all) for normal use, and for some people, for software installation.
The Apple brand drives are hopeless, they violate the scsi spec
too much. The NeXT drives might work for filesystem stuff; and
possibly s/w installs on the r4k Indigo, but not installs on other
systems.
| 3. If they do work will they be able to read the SGI
| specific inst format?
Yes, as long as they are on an SGI system.
--
Let no one tell me that silence gives consent, | Dave Olson
because whoever is silent dissents. | Silicon Graphics, Inc.
Maria Isabel Barreno | olson@sgi.com
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads