🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sun.hardware
Article #3386

Re: Tool for removing SIMMs

#3386
From: Craig Dewick
Date: Tue, 21 Feb 1995 02:34
22 lines
1934 bytes
In <3i26kt$dnq@source.asset.com> watson@source.asset.com (Dave Watson) writes:

>I made a perfectly good simm remover from a big paperclip
>with the help of a pair of needle-nose pliers.

>It is not used to PULL the simms up to LEVER 
>them out.

That's how I use the right-angled scriber. It's much easier and safer (for
both your hand and the SIMM's) to lever them out. If you lever them from
the correct side of the SIMM PCB the levering action pushes the it back
far enough so the plastic securing clip that's part of the SIMM 
socket disengages from the hole in the SIMM PCB at that end. 

Regards,

Craig.
-- 
 Craig Dewick (craig@orb.apana.org.au) - Passenger train driver, Sydney, Aust.
  Support *independent* media <--> Support your local community radio station
 Swimming in the MUSIQUARIUM of life <--> Monday 2 - 4pm, 2SER FM (107.3 MHz).
 Always striving for a secure long-term future in an insecure short-term world
Technical Details
Message-ID: <3ibjfl$d96@orb.apana.org.au>
Path: arc1-ca.pugleaf.net!nntp.gmd.de!newsserver.jvnc.net!rutgers!munnari.oz.au!news.uwa.edu.au!yarrina.connect.com.au!warrane.connect.com.au!sleeper.apana.org.au!orb.apana.org.au!orb.apana.org.au!Not-For-Mail
References: <gerrymD3pqn3.D98@netcom.com> <3hji5e$1jo@orb.apana.org.au> <3i26kt$dnq@source.asset.com>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: f4671,4243e0cb1d1f6d70
X-Google-Attributes: gidf4671,public
X-Google-Thread: f88e1,de27edd57e69a81b
X-Google-Attributes: gidf88e1,public
X-Google-Thread: 10d053,de27edd57e69a81b
X-Google-Attributes: gid10d053,public
X-Google-ArrivalTime: 1995-02-21 11:59:29 PST
Path: arc1-ca.pugleaf.net!nntp.gmd.de!newsserver.jvnc.net!rutgers!munnari.oz.au!news.uwa.edu.au!yarrina.connect.com.au!warrane.connect.com.au!sleeper.apana.org.au!orb.apana.org.au!orb.apana.org.au!Not-For-Mail
From: craig@orb.apana.org.au (Craig Dewick)
Newsgroups: comp.sys.sun.hardware,aus.computers.sun,alt.sys.sun
Subject: Re: Tool for removing SIMMs
Date: 21 Feb 1995 13:34:29 +1100
Organization: ORB - ICE Matrix Reactor Core
Lines: 22
Message-ID: <3ibjfl$d96@orb.apana.org.au>
References: <gerrymD3pqn3.D98@netcom.com> <3hji5e$1jo@orb.apana.org.au> <3i26kt$dnq@source.asset.com>
NNTP-Posting-Host: orb.apana.org.au
X-Newsreader: NN version 6.5.0 #4 (NOV)