Article View: comp.sys.sun
Article #10965ie0: lost interrupt: resetting
From: Jim Rudolf
Date: Wed, 15 Feb 1989 21:02
Date: Wed, 15 Feb 1989 21:02
33 lines
1693 bytes
1693 bytes
I vaguely remember seeing this discussion somewhere before. My apologies
if it has already been run into the ground.
We have two 3/280 servers running SunOS 3.5. Almost on a weekly basis,
usually during a period of moderate net activity, one of the servers will
start spewing forth with:
ie0: lost interrupt: resetting
If this starts happening, we'll generally start getting a few of these too:
NFS getattr failed for server neptune: RPC: Timed out
Quoting from the man page:
ie%d: lost interrupt: resetting
The driver and 82586 chip have lost synchronization
with each other. The driver recovers by resetting
itself and the chip.
Our ethernet boards must not have read the man pages, because the affected
board does not recover by itself. When this happens, the server is pretty
much hung up, and the only effective solution we've come up with is the
dreaded L1-A. Who else has experienced this? What did you do to stop it?
Thanks for your help,
Jim Rudolf
rudolf@oce.orst.edu
College of Oceanography
Oregon State University
[[ I can find no evidence of a previous discussion about this in either
volume 6 or 7. --wnl ]]
Technical Details
Message-ID:
<8902080633.AA07926@oce.orst.edu>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-requestShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request From: rudolf@oce.orst.edu (Jim Rudolf) Newsgroups: comp.sys.sun Subject: ie0: lost interrupt: resetting Message-ID: <8902080633.AA07926@oce.orst.edu> Date: 15 Feb 89 21:02:12 GMT Sender: usenet@rice.edu Organization: Sun-Spots Lines: 33 Approved: Sun-Spots@rice.edu Original-Date: Tue, 7 Feb 89 22:33:12 PST X-Sun-Spots-Digest: Volume 7, Issue 157, message 4 of 21