Multiple interrupt handlers?

Article View: comp.sys.sun

Article #10966

#10966

From: Craig Schamp
Date: Wed, 15 Feb 1989 21:22

14 lines
1199 bytes

I'm writing a disk controller driver for a (Sun-3) VMEbus device that
nominally wants two (2) interrupt vectors: Vector V is for DMA completion
interrupts, and vector V+1 is for status pending interrupts.  My question
is: How do I cause the interrupt vector table to be set correctly when the
device probe routine is called, especially when the interrupt that I force
the board to generate is the one at vector V+1?  In 4.2BSD, I believe this
is done by mucking with 'cvec' and 'uba_hd[numuba].uh_lastiv' in the probe
routine.

Please reply directly to me, as I am not yet on the sun-spots mailing list.

Thanks,
Craig Schamp				argosy!craigs@decwrl.dec.com
			{ames,amdahl,pyramid,sun}!decwrl!argosy!craigs

Technical Details

Message-ID: <8902071807.AA10442@otto.local>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: argosy!craigs@decwrl.dec.com (Craig Schamp)
Newsgroups: comp.sys.sun
Subject: Multiple interrupt handlers?
Message-ID: <8902071807.AA10442@otto.local>
Date: 15 Feb 89 21:22:39 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 14
Approved: Sun-Spots@rice.edu
Original-Date: Tue, 7 Feb 89 10:07:50 pst
X-Sun-Spots-Digest: Volume 7, Issue 157, message 5 of 21