🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.sun
Article #14040

Re: sparcstation disk drives

#14040
From: Tibor S Mikes
Date: Fri, 02 Mar 1990 19:22
25 lines
1672 bytes
In article <5366@brazos.Rice.edu>, oscarmir@athena.ee.msstate.edu (Doug Meyer) writes:
> Ya know those nice little 110MB 3.5" hard drives in the Sun SPARCstations?
> 
> [stuff deleted] 
> 
> Has anybody else seen an unusual mortality rate for SPARCstation 1 hard
> disks?  Or was this just a lucky fluke?

Doug:

I recently ran into similar problems with three brand new SPARC1's at a
client' site.  The drives have barely been used and the client had to send
the machines back to their VAR for replacements.  I know that these
machines were babied and there was no chance of damage by the customer,
suggesting perhaps that the drives themselves are prone to damage.  The
one common factor in all of the machines is that the VAR had opened the
machines and possibly could have cause some electrostatic shock damage
which doesn't always manifest itself right away. [By the way,
electrostatic shock damage can be caused by anyone coming into contact
with the machine, and the machine doesn't even have to be opened for it to
be affected - the spark (no pun intended) can go right thru the CRT
directly into the CPU over the connecting cables.]

Steve
e-mail:	{att!}pjspot!smikes	->	Phone: (201) 615-4718
Technical Details
Message-ID: <5423@brazos.Rice.edu>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request
From: smikes@cbnewsi.att.com (Tibor S Mikes)
Newsgroups: comp.sys.sun
Subject: Re: sparcstation disk drives
Keywords: Hardware
Message-ID: <5423@brazos.Rice.edu>
Date: 2 Mar 90 19:22:45 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 25
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v9n60
X-Sun-Spots-Digest: Volume 9, Issue 60, message 13