Reset problem

Thread View: comp.sys.ti.explorer

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Terry Escamilla Mon, 05 Jun 1989 19:00

#404

Author: Terry Escamilla
Date: Mon, 05 Jun 1989 19:00

16 lines
1188 bytes

I've just tried another trick that used to work.  I took out the
microExplorer board, removed the 8 MB memory expansion, and reseated
the microExplorer board.  The system worked fine.  I also changed 
and used a different NuBus slot.  Then I reseated the memory expansion
board and tried again.  The system is working fine now.  If the reset
problem arises again, I'll yell for help again.  

Our memory expansion board is only seated on the mother board using
the expansion connector.  We sent the board in once before, but when
it returned from TI, it didn't have the support brackets which 
were originally shipped with the expansion board.  Does anyone know
how/where to get support pins/brackets for the mother board/memory
expansion board for the microExplorer.

terry@cssun.tamu.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads