Seiko 3620

Thread View: comp.terminals

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Michael R. M. Cheselka Sat, 02 Jan 1993 17:52

#1328

Author: Michael R. M. Cheselka
Date: Sat, 02 Jan 1993 17:52

27 lines
1550 bytes

I need to get a termcap for a Seiko 3620.  These terminals were attached to
a Seiko 8610 multi-user C/PM box.  I would like to recieve email from
anyone who may consider themselves an expert concerning information about
Seiko 3620.  Esp. annoying is the escape sequence:

ESC [ Ps1 ; Ps2 G

...which selects a tone, either 0 for 600hz, or 1 for 1200hz, for a binary
value( up to 16384) in increments on 26.6666ms, such that:

CTRL G == ESC[1;10G

...which is a 1200hz tone for 267ms.  The problem is that I would like to
write a morse code tutor that would work over phone lines with this
terminal.  To do that I would have to be able to specify a unit of silence
for a duration of 26.6666ms as well.

Any wizards out there?

P.S.  This terminal expects 12 volts on the rs232c port, but most modems
use 5 volts now.  What should I do?  Pull teeth on the serial cable?  Which
teeth?
-- 
cheselka@cactus.org               N5UVV              Michael R. M. Cheselka
os9@gnu.ai.mit.edu        Hangs out on 145.21mhz       400 W. 34th st. #103
membership@cactus.org                                 Austin, TX 78705-1331
{...}!cs.utexas!cactus.org!cheselka (512)452-9412v ( 24hours answer. mach.)

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads