Link MC6 queries

Thread View: comp.terminals

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Michael T. Davis Tue, 03 Nov 1992 13:32

#36

Author: Michael T. Davis
Date: Tue, 03 Nov 1992 13:32

16 lines
1249 bytes

	Has anyone had any luck using the Tektronix 4010/4014 emulation mode
of the Link MC6 terminal?  Whenever I try to use it, either from Setup mode,
or by sending the escape sequence to enter it, the terminal loses all I/O and
the only thing I can do is move the graphics cursor around the screen with
the cursor control keys.  The only way out of this mode is to cycle the power
on the terminal.  If anyone can offer any information, I'd appreciate it.  In
normal operation, I'm using the terminal in VT220-7 mode.  I have an ANSI
keyboard (which has the same key layout as a DEC LK201).

							Thanks,
							 Mike
--
 Internet: davism@KCGL1.eng.ohio-state.edu |
            -or- DAVISM+@osu.edu           |   These Thoughts, They Be Mine
   BITNET: DAVISM+@OHSTMAIL.BITNET         |

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads