SLC 5/05 Ethernet Connection

Thread View: control.sendsys

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Aaron Zarse Mon, 10 Aug 1998 00:00

Author: Aaron Zarse
Date: Mon, 10 Aug 1998 00:00

13 lines
1327 bytes

I have been using a PC to communicate with a SLC 5/05 controller via the
ethernet port on the controller.  I am running Windows NT 4.0 and connecting
with the SLC through a local area network using a hub.  Communication with
the SLC works fine when using the hub and LAN but I need to eliminate the
use of the hub and connect with the SLC using a single cable from my PC.  I
have attempted making the connection with a straight cable and what I
believe is a standard crossover cable for ethernet.  neither of these cables
have worked and I am wondering if there are any changes that need to be made
to the networking setup in windows or if a single cable can replace the hub
and work.  If anyone has any experience with this type of application please
contact me at

    azarse@rsa.net

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads