🚀 go-pugleaf

The problem isn't to make your CD-ROM work in DOS but W2K, I'm sure DOS will
work fine my Grand-Mother could write a driver for DOS, I guess W2K is too
hard for you guys because there's not 1 Creative CD-ROM I worked with that
works FINE at 100% in W2K.

P.S. W2K means windows 2000 if you didn't know


"Chris Gilbert (Creative Labs)" <cgil@clok.creaf.com> wrote in message
news:9g0vdq$7uk$1@news.creativelabs.com...
> I would suggest trying the drive in Dos to see if you get the same
results.
> You may also want to check all of your connections and make sure that
> everything is hooked up properly.
>
> In order to make a bootable floppy disk with IDE CD-ROM drivers:
>
> 1)  Create a bootable floppy disk (format a:/s)
>
> 2)  Download SBIDE121.EXE, and extract the files into their own directory
> (like C:\SBIDE).
>
> 3)  Copy SBIDE.SYS from C:\SBIDE to the floppy disk.
>
> 4)  Edit the config.sys on the floppy and add the following line:
> DEVICE=A:\SBIDE.SYS /P:170,15 /p:1F0,14 /D:MSCD001 /V
>
> 5)  Copy MSCDEX.EXE from C:\WINDOWS\COMMAND to A:
>
> 6)  Edit the autoexec.bat on the floppy and add the following line:
> A:\MSCDEX.EXE /D:MSCD001 /V
>
> 7)  Start your computer using the boot floppy.
>
>
>
> --
> Chris Gilbert
> Creative Labs
> Technical Support
> www.soundblaster.com
> Mike C <Bruticus@the-beach.net> wrote in message
> news:9g0d72$qtc$1@news.creativelabs.com...
> > I have a Creative 52X CD-Rom and it doesn't want to work, when I put in
a
> CD
> > it just makes My Computer inaccessible for a few seconds then it ejects
> the
> > disk. WHat is wrrong with my CD-Rom,.. can I clean it or something what
> else
> > could it be? Im running Windows 2000 with it.
> >
> > Thanks,. please email me at bruticus@the-beach.net
> >
> > Mike
> >
> >
>
>