🚀 go-pugleaf

Thanks for the help, Mark -- but I'm still having some problems.  Below is
quoted from your post with added comments by me.


> If it is still not working, try changing all of the hardware settings for
> the card by doing the following steps:
>
> 7.   You should be able to choose from these settings, * indicate  default
> settings:
>              Interrupt Request: 05*, 07, 09 (sometimes), and 10

I tried this, but Interrupt Request is not an option..... it's not even
listed or displayed.  However, if I select "Select Configuration Manually"
it then displays IRQ 5 which conflicts with two other devices on my
computer.  It will not allow me to change the IRQ off 5 on any of the three
devices.  But under "Settings" it shows that the IRQ is set to 7.

Also, when I use the MS-DOS shortcut to reboot into DOS Mode, it displays
"Creative SB16 Emulation Driver, Version 3.06, Creative Audio @ Port 1480,
IRQ 11".  Does this mean I need to change the 'I' setting in my Set Blaster
line to 'I11'?


> 4.   Change the "Allow LPT Interrupt Sharing" option.

Whenever I attempt this the computer completely locks up.  It is checked
normally, but if I uncheck it and hit "apply", the whole system freezes.


>
>
>
>
> Dave Barnhart <dbarnhart@cfl.rr.com> wrote in message
> news:9eanae$gpa$1@news.creativelabs.com...
> > Hi All,
> >
> > I'm desperately attempting to get an old DOS game (Privateer) to run
under
> > Win98SE.
> >
> > So far I've been able to create a shortcut to throw me into MS-DOS Mode
> > with a new Config and Autoexec.  During boot-up, everything seems to
load
> > fine, but when I attempt to run the game, I get no sound.
> >
> > My sound card is a SoundBlaster PCI 512, and here are copies of my
config
> > and Autoexec.
> >
> > Config:
> > Device=C:\WINDOWS\Himem.Sys /Testmem=off
> > Device=C:\WINDOWS\EMM386.Exe 16384 RAM
> > DOS=high, UMB
> >
> > Autoexec:
> > PROMPT=$p$g
> > PATH=C:\WINDOWS;c:\windows;c:\windows\COMMAND
> > LH c:\mouse\mouse.exe
> > SET SBPCI=C:\SBPCI
> > SET MSINPUT=C:\MSINPUT
> > SET CTSYN=C:\WINDOWS
> > SET BLASTER=A220 I5 D1 H5 P330  T6
> > C:\PROGRA~1\CREATIVE\SBPCI512\DOSDRV\SBEINIT.COM
> >
> > Please note that I'm running the game from the C Drive, so there's no
need
> > for CD drivers.
> >
> > So, where am I going wrong?  Anyone know why the game won't run with
> sound?
> > Should there be a line in the Config.sys for the sound card?
> >
> > Any assistance would be GREATLY appreciated.
> >
> >
>
>