🚀 go-pugleaf

IRQ 5 :
ACPI IRQ holder for PCI-Steering
ACPI IRQ holder for PCI-Steering
Intel(r) 82801AA SMBus Controller
Realtek PCI Fast Ethernet NIC

IRQ 7 :
LPT Printerport

IRQ 10 :
ACPI IRQ holder for PCI-Steering
NVIDIA RIVA TNT2 Model 64 ........

But can it really be true that the pci512 card only need
of course the one IRQ, but then only one I/O area, and nothing else ?
Not even DMA or Memory ......

The SB16 emulator for pci512 uses alot more !

/AllanMC

Ossama M. Elkadi <oelkadi2000NOSPAM@yahoo.de> skrev i en
nyhedsmeddelelse:92l4dk$b1a$1@news.creativelabs.com...
> IRQ 00 is reserved for the system timer - it shouldn't be allocated to the
> sound card. Typical allocations forthe sound card would be IRQs 5, 7 or
10.
> What is allocated to these IRQs in your system?
>
> Regards,
> --
> Ossama Elkadi
> Technical Assistant
> BMW-ACVA CKD Plant
> (Please do not send any e-mails to me
> unless explicitly asked to do so.
> When sending e-mails, please remove the
> NOSPAM from my address)
>
> ========================================
> "Allan M. Christensen" <allanmc@pc.dk> wrote in message
> news:92jc0c$5da$1@news.creativelabs.com...
> > Well i can only come to the device manager if the card is disabled, and
> then
> > it says that
> > windows can't define which resources this card uses, and that it could
be
> > because there is
> > a conflict.
> > When press the button so i can define the settings, it is set to assign
> the
> > settings automaticaly,
> > and the IRQ is set to 00, and the I/O is set to 0000-001F (and those 2
are
> > not free).
> >
> > Maybe i could add that i have a onboard soundcard in my pc, but i have
> > disabled it in the bios,
> > and it isn't in the device manager in windows any more.
> >
> > Plz Help me !!
> >
> > Mark Kahrs [Creative Labs] <mkahrs@clok.creaf.com> skrev i en
> > nyhedsmeddelelse:92j6uc$1lu$1@news.creativelabs.com...
> > > What resources is Windows trying to assign the card?   If you look at
> the
> > > IRQ usage in your device manager is it sharing with anything else?
> > >
> > >
> > >
> > > --
> > > Mark Kahrs
> > > Creative Tech Support
> > > mkahrs@clok.creaf.com
> > >
> > >
> > >
> > > Allan M. Christensen <allanmc@pc.dk> wrote in message
> > > news:92j617$10t$1@news.creativelabs.com...
> > > > I have been waiting a few days for help with my pci512 card - i
really
> > > > really need it to work !!
> > > >
> > > > I still have the same problem - windows crashes every time i start
it,
> > if
> > > > the pci512 card is enabled.
> > > > And there isn't many diffrent drivers to try with - actually only
ONE
> > > driver
> > > > on CL's site.
> > > >
> > > > So if no one can help me fixing this, i can only use this card for
> > playing
> > > > cd's and dos games (hmm my old sound card could do that very good
too)
> > > >
> > > > Here is a more detailed version of my problom (as i wrote in a older
> > post)
> > > :
> > > >
> > > > I have installed my SB PCI-512 sound-card in my pc, but every time i
> > > install
> > > > the drivers in windows98, windows crashes.
> > > > When i restart windows, windows begins to play the windows startup
> sound
> > > > (with the pci512 card), but after a few seconds the
> > > > sound stops, and it turns to a never ending long beep, while windows
> > again
> > > > is crashed. Windows will only run if i disable the pci512 card in
> device
> > > > manager.
> > > > The SB16 emulator in dos work fine - i have no problems running all
> the
> > > > test's in SBEGO.exe.
> > > > I do also not have problems with playing CD's from my cd-rom drive.
> > > >
> > > > --
> > > >
> > > > /AllanMC
> > > >
> > > >
> > >
> > >
> >
> >
>
>