🚀 go-pugleaf

Am I right in assuming that IRQ 11 is free? In that case, try to physically
relocate the PCI512 card to be in the PCI slot next to the AGP card. If IRQ
11 originally was free, this will re-allocate the resources such that IRQ 11
is allocated to the TNT2 card (BTW, I use the same card in my system), IRQ
10 to the PCI512 card, and IRQ 5 remains as it is. The problem is that IRQ 5
is normally needed for the sound blaster legacy device (also known as SB16
emulator, or DOS support emulator), which may be the source of problems.
Are you currently using the network card? If no, remove it from your system.
If yes, see what IRQs are still free and repost.

HTH,
--
Ossama Elkadi
Technical Assistant
BMW-ACVA CKD Plant
(Please do not send any e-mails to me
unless explicitly asked to do so.
When sending e-mails, please remove the
NOSPAM from my address)

=====================================
"Allan M. Christensen" <allanmc@pc.dk> wrote in message
news:92la2s$flj$1@news.creativelabs.com...
> IRQ 5 :
> ACPI IRQ holder for PCI-Steering
> ACPI IRQ holder for PCI-Steering
> Intel(r) 82801AA SMBus Controller
> Realtek PCI Fast Ethernet NIC
>
> IRQ 7 :
> LPT Printerport
>
> IRQ 10 :
> ACPI IRQ holder for PCI-Steering
> NVIDIA RIVA TNT2 Model 64 ........
>
> But can it really be true that the pci512 card only need
> of course the one IRQ, but then only one I/O area, and nothing else ?
> Not even DMA or Memory ......
>
> The SB16 emulator for pci512 uses alot more !
>
> /AllanMC