🚀 go-pugleaf

If you boot into safemode you should be able to disable the emulation.  Try
to see if you do this if you will be able to boot.  You might also be able
to check the IRQ by forcing the config for the SBLive.


--
Mark Kahrs
Creative Tech Support
mkahrs@clok.creaf.com





Allan M. Christensen <allanmc@pc.dk> wrote in message
news:92qgl4$s5n$1@news.creativelabs.com...
> Yes IRQ 11 is free, but i don't have any AGP slots :/
> The TNT2 card is pci - dosn't that matter ?
> Should i relocate it over or under the TNT2 card ?
>
> Well i don't use my network-card at home - only at netpartys.
> But i need both the networkcard and soundcard for netpartys (multiplayer
> games you know .. hehe)
> Can't i get it to work with the network card in ? I did try
> to disbale it from device manager, and then try the soundcard, but it
didn't
> work :(
>
>
>
> Ossama M. Elkadi <oelkadi2000NOSPAM@yahoo.de> skrev i en
> nyhedsmeddelelse:92ls0e$sr2$1@news.creativelabs.com...
> > Am I right in assuming that IRQ 11 is free? In that case, try to
> physically
> > relocate the PCI512 card to be in the PCI slot next to the AGP card. If
> IRQ
> > 11 originally was free, this will re-allocate the resources such that
IRQ
> 11
> > is allocated to the TNT2 card (BTW, I use the same card in my system),
IRQ
> > 10 to the PCI512 card, and IRQ 5 remains as it is. The problem is that
IRQ
> 5
> > is normally needed for the sound blaster legacy device (also known as
SB16
> > emulator, or DOS support emulator), which may be the source of problems.
> > Are you currently using the network card? If no, remove it from your
> system.
> > If yes, see what IRQs are still free and repost.
> >
> > HTH,
> > --
> > Ossama Elkadi
> > Technical Assistant
> > BMW-ACVA CKD Plant
> > (Please do not send any e-mails to me
> > unless explicitly asked to do so.
> > When sending e-mails, please remove the
> > NOSPAM from my address)
> >
> > =====================================
> > "Allan M. Christensen" <allanmc@pc.dk> wrote in message
> > news:92la2s$flj$1@news.creativelabs.com...
> > > IRQ 5 :
> > > ACPI IRQ holder for PCI-Steering
> > > ACPI IRQ holder for PCI-Steering
> > > Intel(r) 82801AA SMBus Controller
> > > Realtek PCI Fast Ethernet NIC
> > >
> > > IRQ 7 :
> > > LPT Printerport
> > >
> > > IRQ 10 :
> > > ACPI IRQ holder for PCI-Steering
> > > NVIDIA RIVA TNT2 Model 64 ........
> > >
> > > But can it really be true that the pci512 card only need
> > > of course the one IRQ, but then only one I/O area, and nothing else ?
> > > Not even DMA or Memory ......
> > >
> > > The SB16 emulator for pci512 uses alot more !
> > >
> > > /AllanMC
> >
> >
> >
>
>