🚀 go-pugleaf

Kay i'll try that, but i think i have tryed it ....

But Mark .... can it really be true that the pci512 card only need
of course the one IRQ, but then only one I/O area, and nothing else ?
Not even DMA or Memory ......

Mark Kahrs [Creative Labs] <mkahrs@clok.creaf.com> skrev i en
nyhedsmeddelelse:92t3st$mig$1@news.creativelabs.com...
> If you boot into safemode you should be able to disable the emulation.
Try
> to see if you do this if you will be able to boot.  You might also be able
> to check the IRQ by forcing the config for the SBLive.
>
>
> --
> Mark Kahrs
> Creative Tech Support
> mkahrs@clok.creaf.com
>
>
>
>
>
> Allan M. Christensen <allanmc@pc.dk> wrote in message
> news:92qgl4$s5n$1@news.creativelabs.com...
> > Yes IRQ 11 is free, but i don't have any AGP slots :/
> > The TNT2 card is pci - dosn't that matter ?
> > Should i relocate it over or under the TNT2 card ?
> >
> > Well i don't use my network-card at home - only at netpartys.
> > But i need both the networkcard and soundcard for netpartys (multiplayer
> > games you know .. hehe)
> > Can't i get it to work with the network card in ? I did try
> > to disbale it from device manager, and then try the soundcard, but it
> didn't
> > work :(
> >
> >
> >
> > Ossama M. Elkadi <oelkadi2000NOSPAM@yahoo.de> skrev i en
> > nyhedsmeddelelse:92ls0e$sr2$1@news.creativelabs.com...
> > > Am I right in assuming that IRQ 11 is free? In that case, try to
> > physically
> > > relocate the PCI512 card to be in the PCI slot next to the AGP card.
If
> > IRQ
> > > 11 originally was free, this will re-allocate the resources such that
> IRQ
> > 11
> > > is allocated to the TNT2 card (BTW, I use the same card in my system),
> IRQ
> > > 10 to the PCI512 card, and IRQ 5 remains as it is. The problem is that
> IRQ
> > 5
> > > is normally needed for the sound blaster legacy device (also known as
> SB16
> > > emulator, or DOS support emulator), which may be the source of
problems.
> > > Are you currently using the network card? If no, remove it from your
> > system.
> > > If yes, see what IRQs are still free and repost.
> > >
> > > HTH,
> > > --
> > > Ossama Elkadi
> > > Technical Assistant
> > > BMW-ACVA CKD Plant
> > > (Please do not send any e-mails to me
> > > unless explicitly asked to do so.
> > > When sending e-mails, please remove the
> > > NOSPAM from my address)
> > >
> > > =====================================
> > > "Allan M. Christensen" <allanmc@pc.dk> wrote in message
> > > news:92la2s$flj$1@news.creativelabs.com...
> > > > IRQ 5 :
> > > > ACPI IRQ holder for PCI-Steering
> > > > ACPI IRQ holder for PCI-Steering
> > > > Intel(r) 82801AA SMBus Controller
> > > > Realtek PCI Fast Ethernet NIC
> > > >
> > > > IRQ 7 :
> > > > LPT Printerport
> > > >
> > > > IRQ 10 :
> > > > ACPI IRQ holder for PCI-Steering
> > > > NVIDIA RIVA TNT2 Model 64 ........
> > > >
> > > > But can it really be true that the pci512 card only need
> > > > of course the one IRQ, but then only one I/O area, and nothing else
?
> > > > Not even DMA or Memory ......
> > > >
> > > > The SB16 emulator for pci512 uses alot more !
> > > >
> > > > /AllanMC
> > >
> > >
> > >
> >
> >
>
>