🚀 go-pugleaf

It is very possible that the drive has become defective. With an out of
warranty RMA, there is a $20 (US, $35 Canadian) diagnostic fee for the
drive. This cost will apply towards the total cost of repair or replacement
of the drive. The RMA department will then contact you for authorization to
fix the drive and give you the cost.

--
Phil Perkins
Creative Labs Technical Support
http://www.creativehelp.com
Tech Support: 405-742-6655
http://www.soundblaster.com
"Jeremy Stanley" <stanmuffin@yahoo.nospam.com> wrote in message
news:8vcovc$b0v$1@news.creativelabs.com...
> No, the system is not overclocked.  It's rated at 400 MHz and running at
400
> MHz.  All clock settings are at the defaults (PCI clock=33MHz; system
> bus=66MHz; multiplier=6x). UDMA is disabled.
>
> Could the drive perhaps need to be cleaned?  If so, what product do you
> recommend?  Note that it still reads CD-ROMs and CD-RWs.
>
> Can it be repaired?  (Since it's over a year old and presumably out of
> warranty, would this cost more than it's worth?)
>
> I've labeled every disc I've burned with the marker that was included with
> the drive, and I didn't expect that marker to outlast the drive.
Apparently
> it has, because unlike the drive, the marker still writes.
>
>
> "Phil Perkins (Creative Labs)" <pperkins@clok.creaf.com> wrote in message
> news:8vbva1$l1m$1@news.creativelabs.com...
> > Do you have the system overclocked? If so, this may cause the problem.
> >
> > --
> > Phil Perkins
> > Creative Labs Technical Support
> > http://www.creativehelp.com
> > Tech Support: 405-742-6655
> > http://www.soundblaster.com
>
>
>