🚀 go-pugleaf

>>In a previous message gary@tequila.demon.co.uk wrote 
>> > 
>> > # Attach the SLIP driver to the serial port
>> > #      if  port 0 slip dev buff mru  baud
>> > #      --- ---- - ---- --- ---- ---  ----
>> > attach asy AUX: 0 PPP sl0 32767 1500 38400
>> > I'm using HSMODEM6 on a Falcon and i don't have any trouble with
>> > BBS's,CAB/Stik
>> > etc so why should i have bother with Oasis/Nos.
>
>NOS doesn't understand HSMODEM. So you have to set the baud rate to the 'old'
>rate which for 115200 is 150. STiK does understand it which is why you can
>configure it with the 'real' baud rate. Also set it in the modem CPX. This
>seems to be important, so don't forget.
>   
>>Isn't the AUX: port restricted to 19200? , you want to change to Modem2
>
>Don't think so. I use AUX: on my Falcon and get a 28800 connection

Where do i change the baud rate to 150? I understand what you're
getting at but i thought this could only be set in the ST's MFP.PRG 
i'm using SCC.PRG which is for the Falcon .
What programs are you using and what are the settings?


--
************************
gary@tequila.demon.co.uk
************************