Problem with xlr8 400Mhz upgrade card

Thread View: demon.tech.mac

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Tim Gowen Tue, 16 Nov 1999 00:00

#97

Author: Tim Gowen
Date: Tue, 16 Nov 1999 00:00

19 lines
1349 bytes

I've tried to get such a card working on a Powermac 7500 with 128Mb
memory.  When the card is installed and the power switched on there is
no chime, but the fan and hard drives spin up.  I've tried a new card,
and have tried putting back the old card - which works fine.

Is this a software issue?  There's a lot of control panel devices and
SCSI devices attached to the machine.  I can't believe that this would
be the problem, but then I'm not a Mac expert.


        Tim



-- 
"All those Silicon Valley billionaires aren't even geeks - they're Gap-
heads in rumpled khakis and Lands' End Polos; they're like less 
ironic Peanuts characters with portfolios." -- Libby Gelman-Waxner
+ The RATM FAQ: http://www.juglans.demon.co.uk/

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads