🚀 go-pugleaf

David Longley <David@longley.demon.co.uk> wrote:
>I  have just had to replace a Creative double speed CD-ROM  which 
>was installed in a machine with a SoundblasterPRO 2. I understand 
>this  (CR-563-B) to be a Panasonic interfaced drive. It has  been 
>replaced  with a CR-562-J which has 1993 software with  it,  even 
>though the drive was manufactured in April 1995.
>
>We are not making much progress installing this either as a  drop 
>in replacement or with the software supplied.
>
>Can anyone help? IT was supplied as a direct replacement for  the 
>1993 CR-563-B.

When installing the software, make sure you select 'soundblaster pro',
with a port address of 220 (if yours is set to the default).

If it's the default software, you *should* have a line in your
CONFIG.SYS like so :-

DEVICE=C:\PANA\CDMKE.SYS /SBP:220

not

DEVICE=C:\PANA\CDMKE.SYS /P:300

- if it is as directly above, then it is not expecting to find the
drive on the end of your sound card - change it to the first method
listed, and you might find it will solve the problem.

Any more problems, mail me direct ....


Dan.


-- 
+--------------------------+---------------------------------+
| Dan St. John-Knight      | Fido 2:255/83.8                 |
| Yate, Bristol, UK.       | Internet dan@sounds.demon.co.uk |
+--------------------------+---------------------------------+