Thread View: hk.comp.pc
1 messages
1 total messages
Started by Christopher K. Tong
Tue, 19 Dec 1995 00:00
CD-ROM problem NEEDS HELP
Author: Christopher K. Tong
Date: Tue, 19 Dec 1995 00:00
Date: Tue, 19 Dec 1995 00:00
80 lines
3397 bytes
3397 bytes
Ladies & Gentlemen,
I am having problems with my CD-Rom, any help or suggestions to pin-point the
problem & solutions to my problem is appreciated.
Hardware : HP Vectra VL2 4/50 ; 16 Mb Ram
Instant Tech CDAT-300X CD-Rom drive attached via parallel
port Interface.
Software : Windows 3.1; DOS 6.2
I have no problem loading the CD-Rom, both DOS & Windows recognize the drive. My
problem is, when I try to access the drive from either DOS or Windows, the drive
will spin up, the busy light comes on, then it will stop spinnig & the drive
locks up. The only way to get out of the jam is to turn off the CD-Rom.
The PC will then come back in DOS as read fail, in Windows as no files.
I can get the drive to spin up using the CD Deck program that comes with the
drive then I can get a directory on the CD once the drive is spinning. As soon
as the drive stops spinning. The same problem continues.
Attached for reference are my autoexec.bat & config.sys files.
@REM THE CHECK LINE BELOW PROVIDES ADDITIONAL SAFETY FOR STACKER DRIVES.
@REM PLEASE DO NOT REMOVE IT.
SET PCTOOLS=c:\cps\data
@C:\STACKER\CHECK /WP
@echo off
set path=c:\DOS;c:\WINDOWS;C:\;C:\MOUSE;C:\STACKER;c:\AOLSLIP\TRUMPET;
C:\CPS\mirror c: h:
SET LMOUSE=C:\MOUSE
LH /L:0;1,24000 /S C:\MOUSE\MOUSE.EXE
LH /L:0;1,45472 /S C:\WINDOWS\SMARTDRV.EXE
PROMPT $p$g
set temp=c:\windows\temp
C:\WINDOWS\SETRES\CLMODE m4
set comspec=c:\dos\command.com
LH /L:1,6384 c:\dos\doskey
LH /L:0;1,9840 /S C:\CPS\dprotect /TRACKER+
LH /L:1,23856 C:\GSLCD\MSCDEX.EXE /D:MSCD000 /m:4 /v
rem Echo Checking HardDisk, Please wait...
rem echo Y|chkdsk c: /f
rem DEL *.CHK
C:\WINDOWS\TEMP\*.TMP
cls
win
DEVICE=C:\DOS\HIMEM.SYS
DOS=HIGH,UMB
DEVICE=C:\DOS\EMM386.EXE NOEMS
BUFFERS=20,0
FILES=80
LASTDRIVE=Z
FCBS=16,0
Stacks=9,512
SWITCHES=/F
DEVICEHIGH /L:1,12048 =C:\DOS\SETVER.EXE
shell=c:\command.com /p
rem DEVICEHIGH /L:1,15792 =C:\DOS\DISPLAY.SYS CON=(EGA,437, 1)
DEVICEHIGH /L:1,64960 =C:\PLUGPLAY\DRIVERS\DOS\DWCFGMG.SYS /NOLOCK
DEVICE=C:\STACKER\DPMS.EXE
DEVICEHIGH /L:1,27872 =C:\STACKER\STACHIGH.SYS
REM DEVICEHIGH /L:1,39360 =C:\DOS\DBLSPACE.SYS /MOVE
DEVICEHIGH /L:1,16016 =C:\GSLCD\IPL001.SYS /D:MSCD000
Install=c:\dos\share.exe
rem DEVICEHIGH=c:\dos\interlink.exe
Thanks in advance & Happy Holidays,
Chris T.
__________________________________________________
Christopher K. Tong
E-mail : cktong@asiaonline.net
Voice : (852) 2832-1638
Fax : (852) 2893-2140
Golf is like Sex;
You don't have to be good to enjoy it ;-)
___________________Hong Kong______________________
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads