🚀 go-pugleaf

Just to let you know that I managed to upgrade my system tonight! The
trick was to go for 'expert' mode. From then on the installation
procedure asked for the 'updates' disk and the upgrade procedure went
ahead...


"Douglas S. Oliver" wrote:
> 
> Eric, actually, my cdrom drive is hdc.  This leads me to think that
> your hard drive is being seen as something other than a dos d: drive.
> D: here to refer to an actual physical drive as opposed to a virtual drive.
> Do you have your two drives as primary and slave on one cable?  Or are
> you using two different cables?  I drive both hard drives off of one
> ide cable.  I know though that other configurations are possible.  --
> d
> 
> Eric Maes <fr013269@worldonline.be> writes:
> 
> > Douglas S. Oliver wrote:
> > >
> > > Something looks very wrong here.  Your physical drives, not
> > > partitions, use the hda, hdb, hdc designations.  Partitions would be
> > > hda1 hda5, hdb1 hdb5, etc.  Unless hda or hdb is not a hard drive, hdc
> > > could not be a hard drive.  That would make three hard drives.  -- d
> > >
> >
> > Hmm, I must have been really confused by this whole upgrade  business...
> > In fact, my first disk is hda, which has 3 partitions, hda1 and hda2
> > both NTFS on which NT is installed and an FAT partition called hda3. My
> > second disk is indeed hdc. I just checked with fdisk, and I do not have
> > a hdb. Now that you mentioned this, I remember that after installing
> > RH5.2 a year ago, I was surprised that it had installed itself on hdc...
> >
> > Cheers - Eric
> >
> > > Eric Maes <fr013269@worldonline.be> writes:
> > >
> > > > Hi,
> > > >
> > > > I'm having some trouble upgrading my current RH5.2 box to RH6.1.
> > > > The environment:
> > > >
> > > >       PC with two hard disks, the first disk has two partitions, on the first
> > > > (hda to Linux) is installed NT, the
> > > >       second partition is an FAT partition (hdb to Linux) which I used as a
> > > > file interchange mechanism.
> > > >       The second disk (hdc) holds my current Linux RH5.2 installation.
> > > >       Booting is done with LILO.
> > > > I have the new boot and update disks from RH.
> > > >
> > > > Upon booting from the boot disk, I enter: linux updates.
> > > > First question: in the instructions on the web site, it is said that the
> > > > 'updates' disk will be asked for and that then the installation will
> > > > continue as normal. I am not asked for this 'updates' disk and after
> > > > booting, the loader loads the GUI stuff from CDROM (I have also tried it
> > > > with the text mode installation with the same results).
> > > > The procedure then identifies my keyboard and mouse and then I have the
> > > > option to do a full install or an upgrade.
> > > > After choosing 'upgrade", I get the following:
> > > >
> > > >       Error mounting ext2 filesystem on hda1: Invalid argument
> > > >
> > > > When I hit the OK button, my system freezes with a dialog box saying:
> > > > 'Searching for Red  Hat Linux installations'.
> > > >
> > > > Looking at the other screens I see the following:
> > > > Dialog screen:
> > > >       File "/usr/lib/python1.5/site-packages/todo.py" line 1130 in
> > > > upgradeFindRoot
> > > >       isys umount('/mnt/sysimage')
> > > >       File "/usr/lib/python1.5/site-packages/isys.py" line 8 in umount
> > > >       return _isys.umount(what)
> > > >       System Error: (22, 'Invalid argument')
> > > >
> > > > Systemlog screen:
> > > >       Can't find an ext2 filesystem on dev ide0(3,1)
> > > >
> > > > I suppose that the upgrade procedure is confused by the fact that my
> > > > current installation sits on the second disk?
> > > >
> > > > Are there any parameters that I can pass to the boot command to solve
> > > > this?
> > > >
> > > > TIA - Eric
> > >
> > > --
> > > *>Douglas S. Oliver<*
> > > *>dsoliver@earthlink.net<*
> 
> --
> *>Douglas S. Oliver<*
> *>dsoliver@earthlink.net<*