🚀 go-pugleaf

type in cat /proc/interrupts and see if you have any conflicts.

In article <38b45af7.0@cisun5000.unil.ch>,
  Gilberto Alemanni <galemann@ipndec2.unil.ch> wrote:
> Hi,
>
> I have a Soundblaster PCI 128 sound card installed on my PC
> running under RedHat 6.1.
>
> When I use sndconfig to configure the sound card, I get:
>
> A PCI sound card was found in
> your system. The details are:
> Model: Ensoniq|ES1371
> [AudioPCI-97]
>
> Then:
>
> A sound sample will now be played to
> determine if your sound card has been
> correctly configured.
>
> But ... nothing happened ! the prompt is blocked.
> I typed ctrl+c to stop sndconfig.
>
> Looking into /etc/conf.modules, I read:
>
> alias sound es1371
>
> Well, now rebooting the PC, I get:
>
> .
> .
> .
> Loading sound module [ok]
> .
> .
> .
>
> From dmesg, I get:
>
> es1371: version v0.13 time 19:57:53 Oct 25 1999
> es1371: found adapter at io 0xb800 irq 5
> es1371: features: joystick 0x0
> es1371: codec vendor  revision 0
> es1371: codec features none
> es1371: stereo enhancement: no 3D stereo enhancement
>
> At this point, no error seems to be occured, but it
> still doesn't work, when trying:
>
> cat somefile.au > /dev/audio
>
> nothing happens, it blocks.
>
> Can anyone help me
>
> Thanks.
>
> Regards.
>
> 			Gilberto.
>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> ALEMANNI Gilberto
> IPHE - Universit� de Lausanne
> CH-1015 Lausanne
> Phone : (++4121)6923736, (++4122)7626965
> Fax   : (++4121)6923605
> mailto:gilberto.alemanni@iphe.unil.ch
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
> " Strange, the cat is no more on grandma, she's probably
>   cold "		Pierre DESPROGES
>


Sent via Deja.com http://www.deja.com/
Before you buy.