🚀 go-pugleaf

< Is this trip necessary? >



   When installing half-height drives in an ibm pc one must play tricks
with cables when the total number of drives is > 2. You must get a power
splitter cable; this is no problem as the whole works fits inside the
system unit. The untidy part is the ribbon cable you must plug into the
D-connector on the back of the disk controller card and run back into the
system unit. Most of the folks I know who have done this have cut a hole
in the back of the system unit with a hacksaw ( new definition of hacker?)
A neater solution is to place the cable directly above the power switch
and then slide the cover on. There's just enough room for the ribbon
cable to fit without binding.


    C.T. Kelley
    Dept. of Math.
    N.C. State U.
    Raleigh, N.C. 27650
    decvax!mcnc!ecsvax!ctk