🚀 go-pugleaf

Mail me your e-mail address and I send you the manual, it is in PDF
format.

Dan

"Locked out of my Modem !" wrote:
> 
> Yep, routing table work is next for me....funny that telnet doesn't
> get whacked. I did disconnect the line cable from the modem and tried
> http again, but it didn't work.
> 
> Thanks for the lead. And thanks for confirming the old/new modem
> reports. I have the ABAA model, but that's not marked on the unit,
> only the cardboard box.
> 
> Post what your man says about the routes if it wouldn't be too much
> trouble. No info about this in my manual.
> 
> J:\>ping 10.0.0.138
> 
> Pinging 10.0.0.138 with 32 bytes of data:
> 
> Request timed out.
> Reply from 157.130.67.45: Destination host unreachable.
> Reply from 157.130.67.45: Destination host unreachable.
> Reply from 157.130.67.45: Destination host unreachable.
> 
> On Thu, 15 Jul 1999 18:51:58 -0400 , dan.r.weber@usa.net  wrote
> >What you actually get is a connection to the web cache server. Your
> >connection is intercepted by Bellsouth's router and forwarded to the
> >cache server, which then tries to connect to 10.0.0.138. You have to
> >create manual arp and route entries to get to the modem directly. The
> >manual describes how to do that but it only works for ABAA models and
> >Bellsouth most often still has AAAA models, like mine. Bad Luck.
> >
> >Dan
> >