grose-jets

Article View: net.auto.tech

Article #807

#807

From: GerardenC
Date: Mon, 24 Mar 1986 19:45

19 lines
1415 bytes

I just installed grose-jets in my dual stromberg carbs. It has made
quite a difference in the way he car starts and runs. The Grose-jet
is a dual ball bearing replacement for the needle valve found in
most carbs. the fuel shutoff is much more positive with this installed.
I noticed a difference the moment I switched the ignition, the electric
fuel pump whirred and stayed on very fast until the fuel bowl filled.
The pump then shut off suddenly as the valve closed. Usually the pump
slows down and stops. There is now no more flooding in the corners,
or under acceleration/braking

For any of you brit car owners out there I would recommend this modification.
especially if the car cuts out in corners. The grose-jet is made for almost 
any carb ever designed, cutom orders are available. see the back of
autoweek for order info.


ihnp4!drutx!druhi!vuser
chuck gerarden

Technical Details

Message-ID: <248@druhi.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!cbosgd!ihnp4!drutx!druhi!vuser

Show Full Headers

Complete Article Headers

Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site druhi.UUCP
Path: arc1-ca.pugleaf.net!utzoo!watmath!clyde!cbosgd!ihnp4!drutx!druhi!vuser
From: vuser@druhi.UUCP (GerardenC)
Newsgroups: net.auto.tech
Subject: grose-jets
Message-ID: <248@druhi.UUCP>
Date: Mon, 24-Mar-86 14:45:47 EST
Article-I.D.: druhi.248
Posted: Mon Mar 24 14:45:47 1986
Date-Received: Thu, 27-Mar-86 06:42:12 EST
Organization: AT&T Information System Labs, Denver, Co
Lines: 20
Keywords: carbs