Thread View: net.auto.tech
1 messages
1 total messages
Started by GerardenC
Mon, 24 Mar 1986 19:45
grose-jets
Author: GerardenC
Date: Mon, 24 Mar 1986 19:45
Date: Mon, 24 Mar 1986 19:45
19 lines
1415 bytes
1415 bytes
I just installed grose-jets in my dual stromberg carbs. It has made quite a difference in the way he car starts and runs. The Grose-jet is a dual ball bearing replacement for the needle valve found in most carbs. the fuel shutoff is much more positive with this installed. I noticed a difference the moment I switched the ignition, the electric fuel pump whirred and stayed on very fast until the fuel bowl filled. The pump then shut off suddenly as the valve closed. Usually the pump slows down and stops. There is now no more flooding in the corners, or under acceleration/braking For any of you brit car owners out there I would recommend this modification. especially if the car cuts out in corners. The grose-jet is made for almost any carb ever designed, cutom orders are available. see the back of autoweek for order info. ihnp4!drutx!druhi!vuser chuck gerarden
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads