Problems with interlan NI 1010A Ethernet controller

Thread View: net.lan

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Ron Sheen Wed, 09 Oct 1985 22:55

Author: Ron Sheen
Date: Wed, 09 Oct 1985 22:55

14 lines
1312 bytes

I am posting this for a friend who does not have access to the
net, please reply directly to seismo!uw70!steve
--------------------------------------------------------------

Our PDP 11/70 is hanging in a pause state whenever the Harvard/CSS
2.9 is booted and our Interlan NI 1010A Ethernet controller board
is on the UNIBUS.  This happens if the device driver is configured
into the system or not.  Changing the CSR address of the device did
not change the symptoms.  The kernel boots and runs fine if the device
is not in the UNIBUS.  There are no problems running 2.8 with the
board installed (2.8 does not use the board, but this shows there are
not UNIBUS problems).

Any suggestions will be apreciated.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads