Thread View: net.micro.trs-80
2 messages
2 total messages
Started by John Windberg
Fri, 25 Jul 1986 18:05
comm4
Author: John Windberg
Date: Fri, 25 Jul 1986 18:05
Date: Fri, 25 Jul 1986 18:05
6 lines
669 bytes
669 bytes
Does anyone have a termcap entry for comm trsdos6.2 model 4? Someone sent me one, but it seems uncompatible with our unix. Also hoe do I set baud etc. on comm? I do not have trsdos6.x manuals. thanks in advance. johnw
Re: comm4
Author: Michael S. Leibow
Date: Sun, 27 Jul 1986 18:01
Date: Sun, 27 Jul 1986 18:01
18 lines
1273 bytes
1273 bytes
In article <3910@reed.UUCP> johnw@reed.UUCP (John Windberg) writes:
>Does anyone have a termcap entry for comm trsdos6.2 model 4?
M4|trs4|trs-80 model 4:\
:bc=^X:bw:cr=^]:nl=^Z:cl=^L:up=^[:am:bs:\
:ho=\034:do=^Z:kb=^H:kd=^J:kl=^H:kr=^I:ku=\013:\
:li#24:co#80:nd=^Y:ce=^^:so=\020:se=\021:
You can set your baud rate using setcom. To see what it is set at don't give
it any arguments. To set baud rate type "setcom (baud=1200)" and it will
change. Once you have your comm port the way you like it, and everything else
on your disk is fine, than type "sysgen" and it will permanently configure
your setup.
--
Michael S. Leibow
UUCP: {allegra,seismo}!rochester!ritcv!msl5864
CSNET: msl5864%rit@csnet-relay.ARPA
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads