Thread View: rec.models.rc
2 messages
2 total messages
Started by Charles W. Collins
Mon, 25 Jan 1993 13:07
Connecting servo cable to rudder
Author: Charles W. Collins
Date: Mon, 25 Jan 1993 13:07
Date: Mon, 25 Jan 1993 13:07
14 lines
910 bytes
910 bytes
What is the best method for connecting a rudder that is on an angle (about 20 degrees)? There is upward swing produced at the connection point as the rudder moves back and forth. Thanks! Chuck ------------------------------------------------------------------------------- Charles W. Collins | Chemical Abstracts Services | E-mail address 3419 Cheshire Rd. | 2540 Olentangy River Road | cwc51@cas.org Delaware, Ohio 43015 | Columbus, Ohio 43202 | (614) 548-5052 | (614) 447-3838 ext. 2517 | USA
Re: Connecting servo cable to rudder
Author: Greg Tarcza
Date: Mon, 25 Jan 1993 15:02
Date: Mon, 25 Jan 1993 15:02
19 lines
1425 bytes
1425 bytes
cwc51@cas.org (Charles W. Collins) writes:
>
> What is the best method for connecting a rudder that is on an angle (about
> 20 degrees)? There is upward swing produced at the connection point as the
> rudder moves back and forth.
Ball joints will do the job. Your local hobby shop should stock them (I
think Dubro makes them).
Greg T.
===============================================================================
Greg Tarcza WA2OOD /
Hewlett-Packard Company Pikes /
P.O. Box 2197 Peak /-, /-,
Colorado Springs, CO 80901 Soaring / / / /
719-590-2471 Society / / /--/
/
gregt@col.hp.com /
===============================================================================
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads