Re:Connecting servo cable to rudder

Thread View: rec.models.rc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by D2KAK Mon, 25 Jan 1993 13:44

#1981

Author: D2KAK
Date: Mon, 25 Jan 1993 13:44

8 lines
928 bytes

I have found that this type of installation is a natural for a pull-pull
cable type control hook-up. I have been using Sullivans Kevlar pull-pull
system for about two years in a quarter scale Laser with NO problems.
DuBro also makes a two sided control horn for pull-pull applications.
You could probably also get away with one of the many ball-link type
connectors if it's a small plane. In many cases, simply aligning the
control horn with the pushrod will work just fine, even though the
pushrod moves up and down slightly as the rudder turns.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads