🚀 go-pugleaf

   Dear prospective employers:

   I am seeking a job that deals with Mechanical and Manufacturing
   Engineering. This job could be an assistant professor or a visiting
   scholar at an university, or as an engineer at a company.  

   After received my Ph.D. in industrial engineering, I had spent 19
   months on doing research work on precision manufacturing and finite
   element analysis of stress distributions in the manufacturing process
   as a post-doctoral fellow at Aachen University of Technology in
   Germany supported by the Alexander von Humboldt Foundation. Now, I am
   visiting the Department of Mechanical and Industrial Engineering,
   State University of New York at Binghamton. 
   
   By reading my CV and list of publications, you will find that I have
   done quite a lot of work not only on manufacturing; but also on
   computer aided monitoring cutting process with acoustic emissions
   technique; finite element analyzing of mechanical and thermal
   Stresses;cryogenic precision diamond turning in the last nine years.
   I am familiar with SUN stations as well as PC computers and good at
   using many programs such as AutoCAD, Harvard Graphics, ANSYS,
   COSMOS/M and Wordperfect.

   Your consideration is greately appreciated.

   At last, with best wishes to you !
 

        Yours truly,

       Dr. Z.Y. Wang
----------------------------------------------------------------------

                CURRICULUM          VITAE

   



   College address:

   Dr. Z.Y. Wang
   Department of Mechanical and Industrial Engineering
   State University of New York at Binghamton
   Binghamton, NY 13902-6000
   E-mail:wangzhi@bingsuns.cc.binghamton.edu
   Tel:(607) 777-4345


  Home address

   Bldg. 21-11,100 Robert St.,Binghamton, NY 13901-2411,USA  
   Tel:(607) 723-5750


 Education    :
            1. Sept.1988 to March 1991
               Ph.D. in Industrial Engineering
               Harbin Institute of Technology
               Overall GPA: 3.7 (on a 4.0 scale)

            2. April 1991-December 1992 
               As a Post-Doctoral research fellow works at
               IPT.RWTH(Aachen University of Technology) in Germany,
               supported by the Alexander von Humboldt Foundation.

  
            3  January 1993 - present.
               As a post-doctoral fellow working at Department of 
               Mechanical and Industrial Engineering, State University of 
               New York at Binghamton,New York 13902-6000.



 Award        :Received by the President of Federal Republic of Germany
               on June 9,1992(photo available)
               Received scholarship in the B.S.M.E. program.
              :Received a scientific research bonus in the M.S.M.E.
               program for the invention of a new type of milling
               cutter.
 
 Professonal Experience:
             1.Finite Element Method Analysis of mechanical and
               thermal stress field. 
             2.Computer aided on-line monitoring tool breakage and
               wear in milling and drilling processes with acoustic
               emission technique.
             3.AutoCAD design.
             4.Precision Manufacturing with diamond turning technique.



References:
              Professor C. Sahay, Ph.D., P.E., Department of
               Mechanical and Industrial Engineering, State University
               New York at Binghamton,New York 13902-6000 
               Tel:(607) 777-2304

              Professor D.C. Sun,Ph.D., P.E., Department of
               Mechanical and Industrial Engineering, State University
               New York at Binghamton,New York 13902-6000
               Tel:(607) 777-2307 
 
 
                           LIST OF PUBLICATIONS(part)
 
 Part 1:Books
    [1] Wang Zhiyong,Yu Yanbo:"The Fracture Theory of Cutting Tools
        Made by Brittle Materials in Intermittent Cutting", published
        at Central China University Press in December 1990.
 
       Part 2:Papers on Computer aided Testing
       [1] Wang Zhiyong,Yuan Zhejun:"On-line monitoring of tool
           breakage in milling process",MACHINE-BUILDING INDUSTRY
           AUTOMATION, 1991\4, page 33-35.
       [2] Wang Zhiyong,Yuan Zhejun:"On-line monitoring tool
           breakage with  AE technique in drilling process",MODULAR
           MACHINE TOOL & AUTOMATIC MANUFACTURING TECHNIQUE,1991\4,
           page  7-9.
       [3] Wang Zhiyong,Dong Shen,Yuan Zhejun:"The intelligent
           expert monitor system of tool breakage in drilling
           process",PROC. OF 11th INTERNATIONAL CONFERENCE OF
           PRODUCTION RESEARCH, August 1991, Guangzhou, China.
 
           Papers on Finite Element Method Analysis
       [4] Wang Zhiyong,Yu Yanbo:"Analysis of mechanical stress
           at entry process in milling cutting", Proc. of 5th
           INTERNATIONAL CONFERENCE ON METAL CUTTING,
           NONCONVENTIONAL CUTTING AND ITS AUTOMATIONS(IMCC),
           April 1989, Peking.
       [5] Wang Zhiyong,Dong Shen,Yuan Zhejun:"Analysis of
           thermal fracture in face milling",JOURNAL OF HARBIN
           INSTITUTE OF TECHNOLOGY, 1990\3, page 132-136.
 
           Papers on Computer Calculation
       [6] Wang Zhiyong,Yu Yanbo:"Computer prediction of the roughness
           in milling cutting process",MECHANIC ENGINEER, special
           edition 1986, page 5-7.
       [7] Yu Yanbo, Wang Zhiyong:"Analysis and optimization of the
           patterns of initial contact of milling cutter", JOURNAL OF
           HARBIN UNIVERSITY OF SCIENCE & TECHNOLOGY, 1987\1,
           page 15-24.
 
 
           Papers on Milling,Turning and Drilling
       [8] Wang Zhiyong,Yu Yanbo:Discussing the machiniability of
           stainless steel in face milling",PROC. OF THE 4th CHINESE
           SOCIETY OF PRODUCTION ENGINEERING 1985, Chang Sha.
       [9] Wang Zhiyong,Yu Yanbo:"Studies and experiments of entry
           fracture in face milling",JOURNAL OF HARBIN UNIVERSITY OF
           SCIENCE & TECHNOLOGY,1987\3,page 1-7.
       [10]Yu Yanbo,Wang Zhiyong:"Analysis of the temperature errors
           measured by thermal-couples in machine tools", MACHINE
           TOOLS,1987\1, page 24-25.
       [11]Yu Yanbo,Wang Zhiyong:"A study of the entry engle in
           milling cutting of stainless stell",TOOL ENGINEERING,
           1987\9,page 40-44.
       [12]Bai Suibin,Wang Zhiyong:"Design of ultraprecision lapper
           with aerostatic bears",MECHANICAL DESIGN AND MANUFACTURING,
           1990\3, page 16-19.
       [13]Dong Shen,Wang Zhiyong,Yuan Zhejun:"To realize high
           precision micro-feed with the aid of AE technique", PROC.
           OF THE 3RD SINO-JAPANESE CONFERENCE ON ULTRAPRECISION
           MACHINING, 1990\5, page T3-01 to T3-05.
       [14]Dong Shen,Wang Zhiyong,Yuan Zhejun:"Design and
           manufacturing of ultraprecision three axes table system
           with air bearing supports", PROC. OF 6TH INTERNATIONAL
           PRECISION ENGINEERING SEMINAR & 2ND INTERNATIONAL
           CONFERENCE ON ULTRAPRECISION IN MANUFACTURING ENGINEERING,
           Braunschweig, Germany , May 1991.
       [15]Wang Zhiyong:"Tool wear in micro-machining of of-copper
           with diamond tools", to be published.
       [16]Wang Zhiyong:"Some observations on tool wear in micro-
           turning of of-copper with diamond tool", to be published.
 
 --------------------------------------------------------------