🚀 go-pugleaf

In article <1993Jan5.160943.16390@bnr.uk> michthom@bnr.ca (Michael Thomson) writes:
>I am looking for _ANY_ info on the care and feeding of the old Tektronix
>scopes. I recently aquired a 20 MHz dual trace storage scope, but the
>calibration is miles out, and the switches need attention. The scope has
>plug-in timebase and amplifier modules as listed below.
>
>Oscilloscope		Type 564 
>
>Timebase		Type 2B67 \ Plug-in modules
>Dual trace amplifier	Type 3A72 / 
>

You might want to get the book, _Oscilloscopes: Selecting and
Restoring a Classic_ by Stan Griffiths.  There are a couple of
chapters on basic restoring information, then a bunch of info on
classic Tek scopes, and finally a list of parts sources.  The book is
available directly from Stan at 18955 SW Blanton, Aloha, OR 97007.
Stan is now retired, but spent more than 30 years working with Tek
scopes, both at Tek and other places.

Have fun, Dan
=====================================================================
        Dan Romanchik              |        danr@umcc.ais.org
       Technical Editor            |         (313) 930-6564
    Test & Measurement World       |     MCI Mail: tmwromanchik
=====================================================================