Article View: sci.electronics
Article #17946Re: TTL Questions
From: Marshall J. Jose
Date: Thu, 20 Aug 1987 17:45
Date: Thu, 20 Aug 1987 17:45
7 lines
996 bytes
996 bytes
Ok -- Signetics says LS can be tied to Vcc with SHORT wires & adequate decoupling. However, 74xx's should be pulled up with 1k to 10k resistors. But wasn't there ever some issue about stored charge in the base-emitter junction, where sloppy pullups could slow gate switching times? Anyway, sorry I spoke before thinking... Marshall Jose mjj@aplvax.jhuapl.edu
Technical Details
Message-ID:
<740@aplvax.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!mimsy!aplcen!aplvax!mjjReferences:
<7105@alice.UUCP> <764@sol.ARPA> <128@umich.UUCP> <15370@onfcanim.UUCP>Show Full Headers
Complete Article Headers
Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Path: arc1-ca.pugleaf.net!utzoo!mnetor!uunet!seismo!mimsy!aplcen!aplvax!mjj From: mjj@aplvax.UUCP (Marshall J. Jose) Newsgroups: sci.electronics Subject: Re: TTL Questions Message-ID: <740@aplvax.UUCP> Date: Thu, 20-Aug-87 13:45:02 EDT Article-I.D.: aplvax.740 Posted: Thu Aug 20 13:45:02 1987 Date-Received: Sun, 23-Aug-87 22:24:26 EDT References: <7105@alice.UUCP> <764@sol.ARPA> <128@umich.UUCP> <15370@onfcanim.UUCP> Reply-To: mjj@aplvax.UUCP (Marshall J. Jose) Organization: The Johns Hopkins University Applied Physics Laboratory Lines: 7 Keywords: TTL, pullups