Article View: sci.electronics
Article #8682Re: PC board jumper ideas?
From: James W. Swonger
Date: Mon, 03 Dec 1990 14:26
Date: Mon, 03 Dec 1990 14:26
9 lines
1123 bytes
1123 bytes
Somebody (maybe Augat) makes small single-pin sockets for insertion into PC boards. These will work well for (appropriately sized) solid wire jumpers. Another alternative is to buy some sockets like the Augat DIP sockets which have the pin completely enclosed in a metal tube (unlike the cheapies which are just folded springs) and carefully remove the pin inserts from the plastic body. Either can be soldered to the pin of the IC if you are quick and careful.
Technical Details
Message-ID:
<1990Dec3.142612.304@mlb.semi.harris.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!gatech!uflorida!mlb.semi.harris.com!thumper.mlb.semi.harris.com!jwsReferences:
<1990Nov30.032401.27217@cascade.Stanford.EDU> <1990Dec1.073320.4342@hayes.ims.alaska.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!gatech!uflorida!mlb.semi.harris.com!thumper.mlb.semi.harris.com!jws From: jws@thumper.mlb.semi.harris.com (James W. Swonger) Newsgroups: sci.electronics Subject: Re: PC board jumper ideas? Message-ID: <1990Dec3.142612.304@mlb.semi.harris.com> Date: 3 Dec 90 14:26:12 GMT References: <1990Nov30.032401.27217@cascade.Stanford.EDU> <1990Dec1.073320.4342@hayes.ims.alaska.edu> Sender: news@mlb.semi.harris.com Organization: Harris Semiconductor, Melbourne FL Lines: 9 Nntp-Posting-Host: thumper.mlb.semi.harris.com