🚀 go-pugleaf

Re: Switching from 5V to 120V
By: Mike McManus on Tue, 27 Feb 1990 17:53

Amiga Video Digitizer, teletype decoder.
By: Dan Jasper Jalkut on Tue, 27 Feb 1990 01:24

Re: NEEDED: Really small motors
By: Tommy Kelly on Tue, 27 Feb 1990 11:34

Re: Mercury and (real) dimes
By: Barry Ornitz on Tue, 27 Feb 1990 16:22

Re: Need Sony Diskman CD remote control interface info
By: Walt Hoffman on Tue, 27 Feb 1990 19:34

Re: Zap, fry, and sizzle
By: Gregory Ebert on Tue, 27 Feb 1990 18:05

Re: Zap, fry, and sizzle
By: Herb Poppe on Tue, 27 Feb 1990 18:33

Re: NEEDED: Really small motors
By: Herb Poppe on Tue, 27 Feb 1990 16:18

Re: Zap, fry, and sizzle
By: David Ambrose on Tue, 27 Feb 1990 05:54

Re: Mercury and (real) dimes
By: Jeff Forbes on Tue, 27 Feb 1990 05:51

Re: boiling water with mains current (was Re: Zap, fry, and sizzle)
By: Thomas Lapp on Tue, 27 Feb 1990 03:09

Re: Phone voice digitization
By: Kyler Laird on Mon, 26 Feb 1990 14:40

Re: Mercury and (real) dimes
By: PAUL E. GANTER on Mon, 26 Feb 1990 23:27

Re: Zap, fry, and sizzle
By: Paul Elliott x225 on Mon, 26 Feb 1990 17:31

Re: Zap, fry, and sizzle
By: Paul Elliott x225 on Mon, 26 Feb 1990 17:00

Re: Prototyping cards
By: Michael Ardai on Tue, 27 Feb 1990 04:10

Re: Buying electronics at auctions
By: John Schuch on Mon, 26 Feb 1990 16:37

Re: Static worse for computer on the floor???
By: Kyler Laird on Mon, 26 Feb 1990 20:36

Re: Re: 1764 UVEPROM
By: John Eaton on Mon, 26 Feb 1990 23:37

Re: Prototyping cards
By: David C. Sehr on Tue, 27 Feb 1990 03:40

Re: U.S. HDTV STANDARDS DELEGATION SCUTTLES 1920x1080 COMMON IMAGE FOR
By: Marvin Sirbu on Wed, 07 Mar 1990 03:51

Toshiba S-AV7 power module specs needed
By: Jeff DePolo-N3HBZ on Mon, 26 Feb 1990 21:32

fine tuned electronics
By: 2 PH on Mon, 26 Feb 1990 23:07

Need Sony Diskman CD remote control interface info
By: D Spinellis on Mon, 26 Feb 1990 15:55

Re: LASER info needed
By: Allen J Michielsen on Mon, 26 Feb 1990 23:06

Re: Zap, fry, and sizzle
By: Kenneth L Moore on Mon, 26 Feb 1990 23:31

NEEDED: Really small motors
By: M.W.Tilden, Hardware on Mon, 26 Feb 1990 19:43

Prototyping cards
By: Bob Clements on Mon, 26 Feb 1990 22:23

Re: boiling water with mains current (was Re: Zap, fry, and sizzle)
By: John Eaton on Mon, 26 Feb 1990 16:53

Where can I get heads for a MacIntosh Disk Drive?
By: Alan Lorimer on Mon, 26 Feb 1990 10:01

Re: Zap, fry, and sizzle
By: Bill Collins on Mon, 26 Feb 1990 17:25

Re: 2764 UVEPROM.
By: Gregory Ebert on Mon, 26 Feb 1990 18:09

Re: 2764 UVEPROM.
By: Brian Kantor on Mon, 26 Feb 1990 20:33

Re: boiling water with mains current (was Re: Zap, fry, and sizzle)
By: Brian Kantor on Mon, 26 Feb 1990 19:24

Re: Zap, fry, and sizzle
By: Gregory Ebert on Mon, 26 Feb 1990 17:12

Re: Zap, fry, and sizzle
By: Jeff Cook on Mon, 26 Feb 1990 17:38

NTSC signals thanks to all.
By: Jim Stewart on Mon, 26 Feb 1990 20:00

Re: Zap, fry, and sizzle
By: P.A. Wilson on Mon, 26 Feb 1990 10:24

Sydney University Power Electronic Simulator
By: Liang Chii on Mon, 26 Feb 1990 14:22

Re: Zap, fry, and sizzle
By: Anthony M. Dziepak on Mon, 26 Feb 1990 08:20

Thermistor Lightbulb Savers
By: Henry Melton on Mon, 26 Feb 1990 00:46

SPICE
By: Jon Jenkins #2 on Thu, 01 Feb 1990 02:17

Re: Zap, fry, and sizzle
By: John Moore on Sun, 25 Feb 1990 05:02

Re: boiling water with mains current (was Re: Zap, fry, and sizzle)
By: David A. Honig on Mon, 26 Feb 1990 03:43

Re: Zap, Fry, and Sizzle
By: Bill Mayhew on Sun, 25 Feb 1990 19:40

Re: 2764 UVEPROM.
By: Theo Deraadt on Sat, 24 Feb 1990 19:18

Re: Buying electronics at auctions
By: Mark Zenier on Sat, 24 Feb 1990 19:41

Re: 2764 UVEPROM.
By: Dzung Hoang on Sun, 25 Feb 1990 05:32

TV to VGA monitor and drive questions
By: Zotos G on Sun, 25 Feb 1990 01:11

Re: boiling water with mains current (was Re: Zap, fry, and sizzle)
By: Barry Fowler on Sat, 24 Feb 1990 00:03

Re: Decent Multimeter Wanted.
By: Barry Fowler on Fri, 23 Feb 1990 23:53

Dying CRT's.
By: A Magic minstrel. on Fri, 23 Feb 1990 20:53

Re: Zap, fry, and sizzle
By: james wygralak on Sat, 24 Feb 1990 22:53

Re: 1764 UVEPROM
By: Wan Ngai Wayne Lee on Sun, 25 Feb 1990 00:24

Re: Zap, fry, and sizzle
By: Kenneth Ng on Sat, 24 Feb 1990 21:58

Wireless IR repeater?
By: Ken Mandelberg on Sat, 24 Feb 1990 18:20

Re: Zap, fry, and sizzle
By: Marshall Jose on Thu, 22 Feb 1990 23:57

Re: 2764 UVEPROM.
By: Dru Nelson on Sat, 24 Feb 1990 15:13

Re: 2764 UVEPROM.
By: Henry Spencer on Sat, 24 Feb 1990 22:59

2764 UVEPROM.
By: BIG DAVE on Fri, 23 Feb 1990 22:58

Re: Need Scematics for DC Motor Speed Control.
By: Rick Inzero on Fri, 23 Feb 1990 15:15

LASER info needed
By: tmm00603 on Fri, 23 Feb 1990 21:21

Specs on A series CMOS (MC14011AL)
By: Michael Katzmann on Fri, 23 Feb 1990 19:13

Re: ON/OFF Remote-Control
By: Temporal Software on Sat, 24 Feb 1990 06:24

Re: low-current power supplies
By: Mark Zenier on Fri, 23 Feb 1990 21:03

Re: audio delay ICs
By: Mark Zenier on Fri, 23 Feb 1990 20:57

Re: Zap, fry, and sizzle
By: Jim Harkins on Fri, 23 Feb 1990 23:40

Re: Need Scematics for DC Motor Speed Control.
By: Gregory Ebert on Fri, 23 Feb 1990 21:13

Re: low-current power supplies
By: Gregory Ebert on Fri, 23 Feb 1990 20:55

current measurement
By: Thomas A. Digiacomo on Sat, 24 Feb 1990 04:24

Re: Zap, fry, and sizzle
By: Kenneth Ng on Sat, 24 Feb 1990 01:47

Re: hardware info needed
By: Craig Shaw on Fri, 23 Feb 1990 18:50

Voltage spec for Nintendo
By: Ron Peterson on Thu, 22 Feb 1990 22:53

Re: boiling water with mains current (was Re: Zap, fry, and sizzle)
By: Rick Inzero on Fri, 23 Feb 1990 15:41

Re: boiling water with mains current (was Re: Zap, fry, and sizzle)
By: Gregory Ebert on Fri, 23 Feb 1990 16:53

Re: ON/OFF Remote-Control
By: T.S. Reddy on Fri, 23 Feb 1990 18:24

Re: 6809 greater than 2 Mhz
By: Craig Shaw on Fri, 23 Feb 1990 18:20

Re: Switching from 5V to 120V
By: kenny on Fri, 23 Feb 1990 17:43

Buying electronics at auctions
By: John Hawkins John Hawkins on Fri, 23 Feb 1990 14:55

Re: Static worse for computer on the floor???
By: Michael Cormack on Fri, 23 Feb 1990 04:09

Re: Fast SRAMS question, part II
By: Henry Spencer on Fri, 23 Feb 1990 17:22

Re: Zap, fry, and sizzle
By: kline on Fri, 23 Feb 1990 10:41

Re: Zap, fry, and sizzle
By: Peter Swain on Fri, 23 Feb 1990 07:30

Re: Zap, fry, and sizzle
By: Phil Gustafson on Fri, 23 Feb 1990 03:21

Re: Zap, fry, and sizzle
By: Norman Yarvin on Fri, 23 Feb 1990 06:01

Re: Fast SRAMS question, part II
By: Tom Bruhns on Thu, 22 Feb 1990 21:03

Re: Zap, fry, and sizzle
By: Henry Spencer on Fri, 23 Feb 1990 04:19

Need: Info on NEC 3.5" floppy drives.
By: Jon Scheer on Thu, 22 Feb 1990 18:35

Re: Solenoid valves, one last try.
By: Kyler Laird on Thu, 22 Feb 1990 23:38

Re: Solenoid valves, THE SOURCES
By: Barry Ornitz on Thu, 22 Feb 1990 23:04

Re: Zap, fry, and sizzle
By: Forrest Cook on Fri, 23 Feb 1990 01:08

ON/OFF Remote-Control
By: Eitan Froumine on Fri, 23 Feb 1990 21:19

hardware info
By: John Safrit on Thu, 22 Feb 1990 21:48

Re: What does "VME" (as in VMS Bus) stand for?
By: Randy Davis on Thu, 22 Feb 1990 21:53

Re: Solenoid valves, one last try.
By: Gregory Ebert on Thu, 22 Feb 1990 17:59

boiling water with mains current (was Re: Zap, fry, and sizzle)
By: Ken Yap on Thu, 22 Feb 1990 20:56

hardware info needed
By: John Safrit on Thu, 22 Feb 1990 18:55

Need Scematics for DC Motor Speed Control.
By: Benjamin Isaac on Thu, 22 Feb 1990 19:21

Re: Solenoid valves, one last try.
By: dan dreyer on Thu, 22 Feb 1990 17:31

Re: Zap, fry, and sizzle (carefully)
By: PAUL E. GANTER on Thu, 22 Feb 1990 16:17

VMEbus cable
By: Joseph Yip on Thu, 22 Feb 1990 17:13

Re: Zap, fry, and sizzle
By: Jeff Forbes on Thu, 22 Feb 1990 15:40

Re: Zap, fry, and sizzle
By: Myron A. Calhoun on Thu, 22 Feb 1990 14:40

Re: Solenoid valves, one last try.
By: Myron A. Calhoun on Thu, 22 Feb 1990 13:56

Re: Zap, fry, and sizzle
By: Gregory Ebert on Thu, 22 Feb 1990 19:08

Re: Switching from 5V to 120V
By: Gregory Ebert on Thu, 22 Feb 1990 17:49

Re: Zap, fry, and sizzle
By: Richard S D'Ippolito on Thu, 22 Feb 1990 18:06

Re: Zap, fry, and sizzle
By: Brian Kantor on Thu, 22 Feb 1990 18:37

Re: audio delay ICs
By: *Hobbit* on Thu, 22 Feb 1990 16:03

Re: Zap, fry, and sizzle
By: Henry Spencer on Thu, 22 Feb 1990 16:26

low-current power supplies
By: John DuBois on Wed, 21 Feb 1990 23:44

Re: What does "VME" (as in VMS Bus) stand for?
By: George Grimes on Wed, 21 Feb 1990 06:11

Solenoid valves, one last try.
By: Allen Rogers on Tue, 20 Feb 1990 16:05

Re: Zap, fry, and sizzle
By: Richard Reiner on Thu, 22 Feb 1990 03:46

Re: Zap, fry, and sizzle
By: Roy Smith on Thu, 22 Feb 1990 03:59

Re: 6809 greater than 2 Mhz
By: Dru Nelson on Thu, 22 Feb 1990 03:25

Re: 2 way IR LED systems
By: John Eaton on Thu, 22 Feb 1990 00:15

Re: Zap, fry, and sizzle
By: Jeff Forbes on Thu, 22 Feb 1990 03:34

audio delay ICs
By: Robert Swirsky on Thu, 22 Feb 1990 03:11

Re: 8-bit fast ad flas
By: Don Novy on Wed, 21 Feb 1990 00:57

Re: Switching from 5V to 120V
By: Henry Spencer on Thu, 22 Feb 1990 04:40

Re: Sources for Speech Rec. Manufacturers
By: David Fenick on Wed, 21 Feb 1990 22:05

Re: Zap, fry, and sizzle
By: Ken Yap on Thu, 22 Feb 1990 02:17

Re: Zap, fry, and sizzle
By: Steve W. Levine, ,, on Thu, 22 Feb 1990 02:15

Re: Fast SRAMS question, part II
By: Jeffrey Mulligan on Thu, 22 Feb 1990 01:15

Zap, fry, and sizzle
By: Gregory Ebert on Wed, 21 Feb 1990 22:03

Re: Video Hacking Help Neede
By: John Whitmore on Wed, 21 Feb 1990 03:51

Re: Switching from 5V to 120V
By: Forrest Cook on Thu, 22 Feb 1990 00:21