Design guide from plastic material supliers

Article View: sci.materials

Article #161

#161

From: AH Al_ashaab
Date: Mon, 07 Sep 1992 20:29

17 lines
1124 bytes

Hi
this the first time for me to use this group and I hope I am not
misusing it!
I always read in the books or papers that the plastic material
suppliers give information about a good design guide of the plastic
products such as the best Max. or Min. wall thickness to be 
used or the length of the wall or the best dimension of a Rib and 
Boss or the shape of round corner and so on. The reason I am
send this message is ask if any body can tell about any plastic 
material suppliers whom really can give such information.

Thanks
Ahmed AL-ASHAAB
Manuf. Eng Dept., Loughborough Univ of Tech
Loughborough, Leics. LE11 3TU, England.
EMail: A.H.Al_ashaab@lut.ac.uk OR ahmed@mansun.lut.ac.uk
Tel 0509-263171 Ext. 4247 Fax. 0509-267725

Technical Details

Message-ID: <1992Sep7.202951.14386@lut.ac.uk>

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!warwick!nott-cs!lut.ac.uk!enaha

Show Full Headers

Complete Article Headers

Newsgroups: sci.materials
Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!warwick!nott-cs!lut.ac.uk!enaha
From: A.H.Al_ashaab@lut.ac.uk (AH Al_ashaab) 
Subject:  Design guide from plastic material supliers
Message-ID: <1992Sep7.202951.14386@lut.ac.uk>
Reply-To: A.H.Al_ashaab@lut.ac.uk (AH Al_ashaab)
Organization: Loughborough University, UK.
Date: Mon, 7 Sep 92 20:29:51 GMT
Lines: 17